[Asterisk-Users] Problem with DTFM and complex international setup

[Mohit Muthanna]

Try compiling Asterisk with RELAX_DTMF (See Makefile).

Mohit.

On 7/1/05, Rob Scott <Rob_Scott at epam.com> wrote:
> We have some guys working in the US who can't always dial back to our
> company in Europe easily (lots of clients require authorization to make
> international calls), so I set up the following:
> 
>    - ipkall.com number links to a FWD number
>    - office Asterisk box registers with FWD
> 
> Then I programmed Asterisk to accept office extension number using DTFM
> tones.
> This works OK.
> 
> Then I programmed Asterisk so that it is possible, using a PIN code, to
> dial out from Asterisk onto the local PSTN.
> 
> This also works occasionally.
> Looking at the message from the Asterisk box it is clear that sometimes
> numbers are missed or repeated in the dial string. This I suspect is
> because Asterisk is listening to the DTMF tones but the signal is
> dropped; sometimes the drop means that a whole digit is dropped and
> sometimes is means that a digit is repeated.
> 
> Does anyone know how I can fix this to make it more reliable
> (out-of-band DTMF?) or a better way to achieve a reliable setup?
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 


-- 
Mohit Muthanna [mohit (at) muthanna (uhuh) com]
"There are 10 types of people. Those who understand binary, and those
who don't."