[Asterisk-Users] Q: PRI leading 0 (area access code) or 00 (country access code) missing on incoming callerid

[Klaus-Peter Junghanns]

Hi,

standard asterisk doesnt support that. However it's in
bristuff (www.junghanns.net/asterisk) zapata.conf:

nationalprefix=0
internationalprefix=00

best regards

Klaus

Am Montag, den 31.01.2005, 20:04 +0100 schrieb Frank Sautter:
> hi,
> 
> on our incoming E1-PRI from german telco Arcor the leading 0 for the 
> (area access code in europe) and the 00 (country accescode in europe) 
> are missing on incoming callerids.
> only prepending a single 0 is not the solution as suggested by some 
> writers on this list, because there is no way to differ between national 
> and international callerids and it's not possible to make the decission 
> based on the length of the presented callerid, as the length of the 
> callerid can vary in most countries.
> 
> e.g.: i'm getting signalled 4123456789 which could be a call from 
> "Barmstedt (Germany)" which has the areacode '4123' or from Switzerland 
> which has the countrycode '41'
> 
> somehow our ericsson businessphone 250 fromerly connected to the same 
> E1-PRI was capable of showing the correct number of leading 0s?!?
> 
> regards
>   frank
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users