[Asterisk-Users] where to buy x100p

[Remco Barende]

>> Want to buy the X100P clones I have? :)
>
> About the best thing that you can do to reduce Echo on the X101P and X100P
> cards is to;
>
> 1. Set the following in zapata.conf;
>
> echocancel=128
> echocancelwhenbridged=no
> echotraining=800
>
> 2. Enable aggressive echo cancellation in zaptel's zconfig.h file;
>
> /*
> * Uncomment for aggressive residual echo supression under
> * MARK2 echo canceller
> */
> #define AGGRESSIVE_SUPPRESSOR
>
> I've had much better luck at killing Echo issues with the above
> suggestions, on both my P133 X101P box as well as my TE405P based PRI
> Gateways. It doesn't solve all the issues, but it does help quite
> noticeably.

Thanks for the tip. However, I have been trying evening after avening to 
get the echo out by tweaking the settings. When I received the TDM11 I 
pulled out the X101P clone followed the example config at the Digium site 
and I was up and running without any. I don't mind trying to play around 
but wasting a lot of time on really cheap hardware was too much waste of 
time when I look back :)

It's probably possible to get the echo out but it's not worth it for me to 
figure it out :)