[Asterisk-Users] reason 24 (Call ended with Q.931 cause)

[Tola Ogunsan]

Hi Michael  and Everyone

I'm trying to connect Asterisk to a CISCO AS5350 using oh323 and I'm getting 
this error

"reason 24 (Call ended with Q.931 cause)"

I've checked the Asterisk wiki and several other resources.  Please can 
anyone give me a hint on what the problem is I reach my wits end.  Thanks

Tola


my config and debug


Configuration of OpenH323 channel driver
------------------------------------------
Version: 0.7.1
Listening on address: 0.0.0.0:1720
Gatekeeper used:  No gatekeeper
FastStart/H245Tunnelling/H245inSetup: OFF/OFF/OFF
Supported formats in pref. order: g729<0>
Jitter buffer limits (min/max): 20-500 ms
TCP port range: 10000 - 20000
UDP (RAS) port range: 10000 - 20000
UDP (RTP) port range: 10000 - 20000
IP Type-of-Service value: 0
User input mode: 3
Max number of inbound H.323 calls: 10
Max number of outbound H.323 calls: 10
Max number of simultaneous H.323 calls: 10
Max call rate (ingress direction): 1.00/30


Starting simple switch on 'Zap/3-1'
   -- Executing Wait("Zap/3-1", "1") in new stack
   -- Executing Dial("Zap/3-1", "OH323/2348033045670 at 209.3.12.49|10") in new 
stack
   -- H.323 call to 2348033045670 at 209.3.12.49 with codec(s) g729
Outbound H.323 call 'ip$localhost/263'.
   -- Called 2348033045670 at 209.3.12.49
Call 'ip$localhost/263' cleared.
   -- H.323 call 'ip$localhost/263' cleared, reason 24 (Call ended with 
Q.931 cause)
Call 'ip$localhost/263' cleared in INIT state.
   -- OH323/L263 is busy
   -- Hungup 'OH323/L263'
== Everyone is busy/congested at this time (1:1/0/0)
   -- Executing Hangup("Zap/3-1", "") in new stack
== Spawn extension (incoming, s, 3) exited non-zero on 'Zap/3-1'
   -- Hungup 'Zap/3-1'
Call 'ip$localhost/263' without owner has already been cleared (2).
   -- Starting simple switch on 'Zap/3-1'