[Asterisk-Users] RE: mgcp <-> h323 problem

[Radovan.Mihalik]

Hello,
 
I try to place a call between CISCO IP phone 7905 (h323) and an analogue
telephone on DLINK DG-104S (mgcp).
Call setup is handled ok - both way, but after connection of the call I
get both site no-audio, even codec are
Set to alow-64 both.
The call is terminated with this  debug output - Didn't get a frame from
channel: MGCP/aaln/1 at dlink-1 and is
Hanged up.
 
Jan 18 20:32:55 NOTICE[114695]: chan_mgcp.c:2293 handle_response:
Terminating on result 406 from aaln/1 at dlink--1
Jan 18 20:32:55 DEBUG[294930]: channel.c:2655 ast_channel_bridge: Didn't
get a frame from channel: MGCP/aaln/1 at dlink-1
Jan 18 20:32:55 DEBUG[294930]: channel.c:2725 ast_channel_bridge: Bridge
stops bridging channels MGCP/aaln/1 at dlink-1 and H323/192.168.1.36
    -- No command found on [dlink] for transaction 19. Ignoring...
Jan 18 20:32:55 DEBUG[294930]: app_dial.c:1029 dial_exec: Exiting with
DIALSTATUS=ANSWER.
  == Spawn extension (incoming-h323, 111, 1) exited non-zero on
'MGCP/aaln/1 at dlink-1'
    -- MGCP mgcp_hangup(MGCP/aaln/1 at dlink-1) on aaln/1 at dlink
    -- Delete connection 1 aaln/1 at dlink-1 with new mode: sendrecv on
callid: 45b99d4f253291c7
 
Any idea ?
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050118/277f767c/attachment.htm