[Asterisk-Users] Problems with loading TE110 module

[Asterisk List]

I encountered the same problem today.  'lspci -nvv' showed that the
subsystem ID of the TE110p changed from 79fe to 79fa or 797e. 
Powering off/on the machine restored the subsystem ID to 79fe and the
wcte11xp module could then load.  I already emailed digium support for
this.


On Mon, 20 Dec 2004 11:32:15 +0100, Tamas J <thomasj at eworld.hu> wrote:
> 
> 
> Hello!
> 
> I discovered, that I'm unable to load ther kernel module under 2.4.28.
> Before that I had 2.4.26 and tryed to upgrade the kernel to 2.4.28.
> After restart (reboot - soft restart) I can't load the module. When I
> go back to 2.4.26 and try to load the module, I'm getting the same
> problem.
> Only turning off/on helps. What can I do? It's very annoying because
> the box is in hosting and not easy to just restart.
> 
> The wct1xxp worked fine in the same box (with restarts also).
> 
> Any idea, hint?
> 
> Kind regards,
>        Tamas
> 
> modprobe wcte11xp
> /lib/modules/2.4.28-magic/misc/wcte11xp.o: init_module: No such device
> Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters.
>      You may find more information in syslog or the output from dmesg
> /lib/modules/2.4.28-magic/misc/wcte11xp.o: insmod /lib/modules/2.4.28-magic/misc/wcte11xp.o failed
> /lib/modules/2.4.28-magic/misc/wcte11xp.o: insmod wcte11xp failed
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>