[Asterisk-Users] Xorcom Rapid CD for Production?

Michael Graves mgraves at mstvp.com
Thu Jan 13 19:45:04 MST 2005


Not yet. I've decided to try Any Powel's Asterisk-Live-CF instead. See
http://www.automated.it/asterisk-Live-cf.htm for details. His install
boots from CF then runs from ramdisk such that the lifespan of CF in
read/write cycles is not a huge issue. I'll put the server on a UPS and
have the VM emailed off to users as a rule. I may also have the VM
written to another server via NFS.

I haven't been able to put time into this recently. I hope to get on
with it next week.

Michael

On Wed, 12 Jan 2005 18:35:41 -0500, Jeff R Glassman wrote:

>Did you ever have success copying your configs to the Xorcom box?
>
>
>Jeff
>
>-----Original Message-----
>From: asterisk-users-bounces at lists.digium.com
>[mailto:asterisk-users-bounces at lists.digium.com]On Behalf Of Michael
>Graves
>Sent: Monday, January 03, 2005 10:49 PM
>To: Asterisk Users Mailing List - Non-Commercial Discussion
>Subject: [Asterisk-Users] Xorcom Rapid CD for Production?
>
>
>Hi All,
>
>The past day or so I've setup a new * server based upon the Xorcom
>Rapid ISO. It did as promised; wiped the base system, installed Debian
>OS, installed Asterisk with a dummy configuration. So far so good.
>
>If I could get the config from my existing * server migrated to the
>Xorcom box the I'd be ready to roll. Essentially, it would be the same
>as I have now on Fedora Core 1, but with a text mode management shell
>and reboots into everything fully working without an user intervention.
>I could put a 1 Gb CF card in a CF to IDE adapter and have an HD free
>server, or just use a small HD instead.
>
>However, I can't seem to get my current * configs to load to the Xorcom
>box. I tried to sftp from my Windows desktop but my Windows ssh/sftp
>client (www.privateshell.com) would not connect to the Xorcom box. I
>confirmed that sshd was installed and running by trying Putty, as
>described in the Xorcom faq. With Putty and its sftp counterpart I
>could one-by-one upload the conf files from my existing server to the
>Xorcom box, but it killed the * install on the Xorcom box.
>
>Anybody have any experience turning the Xorcom Rapid installation into
>a production installation for a small office? It would seem that I only
>need to setup the configs appropriately, but something is going
>dramatically wrong and I can't see it at the moment.
>
>Michael
>
>--
>Michael Graves                           mgraves at pixelpower.com
>Sr. Product Specialist                          www.pixelpower.com
>Pixel Power Inc.                                 mgraves at mstvp.com
>
>o713-861-4005
>o800-905-6412
>c713-201-1262
>
>
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>_______________________________________________
>Asterisk-Users mailing list
>Asterisk-Users at lists.digium.com
>http://lists.digium.com/mailman/listinfo/asterisk-users
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>

--
Michael Graves                           mgraves at pixelpower.com
Sr. Product Specialist                          www.pixelpower.com
Pixel Power Inc.                                 mgraves at mstvp.com

o713-861-4005
o800-905-6412
c713-201-1262








More information about the asterisk-users mailing list