[Asterisk-Users] Setting channel display in SIP

[Howard Lowndes]

On Thu, 2005-01-13 at 11:11, Adam Goryachev wrote:
> On Thu, 2005-01-13 at 10:20 +1100, Howard Lowndes wrote:
> > I have a situation where I need to know which Zap channel an incoming
> > call is on, so that the call can be answered appropriately when a SIP
> > phone displays the channel.  These Zap calls are coming in over PSTN and
> > don't have caller ID.
> > 
> > As far as I can make out my SIP phones (WuChuan HOP-1002) display the
> > user part from the SIP "From:" header as the second line on the
> > display.  If the call comes from another SIP phone then this shows as
> > the phone's number, but when the call comes in over the Zap channels
> > then it gets generated as "asterisk".
> 
> AFAIK, this is the default callerid asterisk uses when it doesn't
> receive callerid.
> Try adding setcallerid in your dialplan,

I tried setcidname in the dialplan without success, so I will try this
suggestion.

>  or callerid in your zapata.conf
> for each channel.

Tried that - no dice.

> 
> 
> Regards,
> Adam
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
-- 
Howard.
LANNet Computing Associates;
Your Linux people <http://www.lannetlinux.com>
------------------------------------------
"When you just want a system that works, you choose Linux;
when you want a system that just works, you choose Microsoft."
------------------------------------------
"Flatter government, not fatter government;
Get rid of the Australian states."