[Asterisk-Users] What's the easiest way to get * to call PSTN?

[TC]

ebayed TNT-Max with SIP for mere 8 pri you might get that for 3K or better
I know i was offered a 4 pri tnt-max for us1500
  ----- Original Message ----- 
  From: Michael B. Murdock 
  To: Asterisk Users Mailing List - Non-Commercial Discussion 
  Sent: Wednesday, January 12, 2005 1:39 PM
  Subject: Re: [Asterisk-Users] What's the easiest way to get * to call PSTN?


  We are also looking for a high density SIP<->TDM gateway (signalling & media) as an alternative to putting the ISDN PRI cards in the * box. Ideally it should support up to 8 ISDN Pri's with NFAS on the TDM side and 100baseT/1000baseT on the IP side.

  Has anyone had experience with this type of config?

  -- Mike

    ----- Original Message ----- 
    From: Walid Azab 
    To: 'Asterisk Users Mailing List - Non-Commercial Discussion' 
    Sent: Wednesday, January 12, 2005 12:18 PM
    Subject: RE: [Asterisk-Users] What's the easiest way to get * to call PSTN?


    We have Asterisk CVS 1.0.2. I intend to connect Asterisk to Cisco 3745 unless there is a better way. Asterisk is not configured with any H/W. Cisco 3745 will accordingly send the call to the softswitch. PGW2200 which controls our AS5300.

    Walid



----------------------------------------------------------------------------
    From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Damon Estep
    Sent: Wednesday, January 12, 2005 3:25 PM
    To: Asterisk Users Mailing List - Non-Commercial Discussion
    Subject: RE: [Asterisk-Users] What's the easiest way to get * to call PSTN?


    You have not specified what type of lines you wish to use, POTS, PRI, T1-CAS, E1, ISDN/BRI ???

     


----------------------------------------------------------------------------

    From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Walid Azab
    Sent: Wednesday, January 12, 2005 5:11 AM
    To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
    Subject: [Asterisk-Users] What's the easiest way to get * to call PSTN?

     

    Hi,

     

    I just want to know what is the easiest way to have Asterisk route calls to PSTN. Hope any one can help me.

     

    PS: Any solution using a Cisco device is preferable.

     

     

    Thanks

    Walid



----------------------------------------------------------------------------


    _______________________________________________
    Asterisk-Users mailing list
    Asterisk-Users at lists.digium.com
    http://lists.digium.com/mailman/listinfo/asterisk-users
    To UNSUBSCRIBE or update options visit:
       http://lists.digium.com/mailman/listinfo/asterisk-users


------------------------------------------------------------------------------


  _______________________________________________
  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050112/37b1720b/attachment.htm