[Asterisk-Users] TE110P with Telstra E1 PRI in Australia and New Zealand

[Andrew Thrift]

Hi All,

We are currently running Asterisk 1.0.3-BRISTUFFED on Gentoo Linux with 
a 2.6 Kernel and this is connected to a Telecom ISDN-BRI connection with 
an HFC-S card, this works quite well but as you can imagine, 2 lines is 
not enough for a company with 40 VoIP phones.

We are about to have TelstraClear install an E1-PRI service to our new 
server room and will need a card to go into our Asterisk machine to 
allow connection to the PRI.  I remember reading that the E100P cards do 
not work with Telstra E1 connections and that a TE410P would be required.
What I am wondering is, the new TE110P is aparently the same as the 
TE410P but only a single port, has anyone tested this card on an 
Australian Telstra PRI/PRA or on a New Zealand one?

If these are confirmed to work then I will be very very happy, otherwise 
I guess I am going to just have to order one for testing!


Thanks for any information that can be provided.


Regards,



Andrew Thrift