[Asterisk-Users] TE410P card in an HP-Compaq DL380 G4 server

Alexander Lopez alex.lopez at opsys.com
Sun Jan 9 23:21:55 MST 2005


Make sure you has a span defined for each port on the TE410P. With out
signaling it would not take interrupts.
 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Karl H.
Putz
Sent: Monday, January 10, 2005 12:38 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] TE410P card in an HP-Compaq DL380 G4
server

I have been having this exact problem with a Tatung dual EMT-64 server
as
well.

I have been trying to get a TE410P running and all looks great, driver
loads, runs ztcfg OK, etc. but no interrupts are ever processed.

One additional piece of info that I have not seen in this thread is that
I
am able to successfully start and run a T100P card in this system.  In
the
same PCI slot, wct1xxp driver built from the same CVS HEAD version as
the
wct4xxp.

Just hoping this might shed some light on the problem for any Digium
folks
monitoring the forum.


Karl Putz



_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list