[Asterisk-Users] Clipping on outbound calls via SIP/IAX

[Jens Vagelpohl]

On Jan 2, 2005, at 21:16, Reid Forrest wrote:

> I'm hoping someone can help me with a problem I've been having for a 
> while
> now. I've googled and wiki'd to no avail.
>
> Whenever I place an outbound call from * to a PSTN through a SIP or IAX
> provider (e.g. Voicepulse or Broadvoice), the first 1/2 to 2 seconds 
> of the
> remote call are clipped (muted). For example, if I call a remote 
> voicemail
> system that usually answers with "Nortel Call Pilot, Mailbox?" I might 
> get
> "ilot, Mailbox?". Everything works fine if I dial an internal 
> extension or
> through the PSTN. Is this just something I'm going to have to live 
> with if
> using an Internet-based termination provider? I'm using Asterisk 1.0.3 
> and
> have tested on different systems, different providers, different 
> phones, etc.

I have the same symptom, dialing from a phone hanging off a iaxy that 
talks to my * and then outbound through NuFone. Where I expect to hear 
"Thank you for calling foo..." I get "calling foo..." only.

jens

---------------

Jens Vagelpohl			jens at zetwork.com
Software Engineer			+49-(0)441-36 18 14 38
Zetwork GmbH				http://www.zetwork.com/