[Asterisk-Users] Connect to siemens pbx with misdn NT mode

[bagattin jerome]

Hi

I try to connect my asterisk with a Siemens Hicom pbx.
I have a PCI cologne Chip card wich support NT mode.
I have compiled mISDN driver, and I use chn_misdn from
debian package.

The card wotk fine in TE mode but mot in NT mode.


for informations :

routeur*CLI> misdn show stacks
BEGIN STACK_LIST:
* Stack Addr: Uid 40200001 Port 1 Type NT Prot. PMP
Link DOWN
 --> bchan: addr 0 channel 0 pid -1 cr ffffffff tone
NOTONE
 --> bchan: addr 0 channel 0 pid -1 cr ffffffff tone
NOTONE


routeur*CLI> misdn show channels
Chan List: (nil)


routeur*CLI> misdn show config
Config: 0x810d678
* Port 1 Context Intern
 --> msn *


/etc/asterisk.misdn.conf
...
[intern]
ports=1
context=Intern
msns=*
....


The S0 in the pbx is configured with the protocole :
netwotk Euro-RNIS PMP

I have also try my driver with pbx4linux, the result :

routeur:~# pbx query
** PBX4Linux **  Version 2.5 (August 2004)

Port  1: NT-mode BRI S/T interface port (for phones)
--------


when I try a call I have the following messages (with
debug =4 )

routeur*CLI> dial 100 at tel
    -- Executing Dial("OSS/dsp", "misdn/1/100") in new
stack
* NEW CHANNEL dad: oad:100 ctx:
* IND : CALL dad:100 tech:misdn/1/100 ctx:
* --> Setting Context to Intern
* Queuing chan 0x80cb358
* List is empty so new chan is Listroot
I SEND:SETUP    pid:-1  mode:NT addr:51300101
 --> dad: 100 oad  channel 0 port 1
$$$ bc already upsetted stid :10000101
--> pid 25
--> oad  dad 100 channel 1
lib: Event_ind:SETUP CONFIRM [NT] : new L3ID  is
9afff0
* SEND: State Dialing pid:25
    -- Called 1/100
I IND :RELEASE_COMPLETE pid:25  mode:NT addr:51300101
 --> dad: 100 oad  channel 1 port 1
--> cause 18
$$$ Bchan deActivated addr 51300101
* REMOVE CHANNEL pid:25 ctx:Intern dad: oad:100
* --> State Down
* --> In State Calling|Dialing
* --> Queue Hangup
* Dequeuing chan 0x80cb358 from List 0x4254eaa8
* Its the first Chan
  == No one is available to answer at this time
I IND :TIMEOUT  pid:25  mode:NT addr:51300101
 --> dad: 100 oad  channel 1 port 1
lib: RELEASE_CR Ind with l3id:9afff0
lib: CLEANING UP l3id: 9afff0
I IND :CLEAN_UP pid:-1  mode:NT addr:51300101
 --> dad: 100 oad  channel 0 port 1
$$$ Bchan deActivated addr 51300101


What wrong ?

Thanks for all

Jerome


	

	
		
Découvrez le nouveau Yahoo! Mail : 250 Mo d'espace de stockage pour vos mails ! 
Créez votre Yahoo! Mail sur http://fr.mail.yahoo.com/