AW: [Asterisk-Users] Transfer a call ? Am I looking for the flashcommand ?

Steven Critchfield critch at basesys.com
Thu Feb 24 18:38:15 MST 2005


On Fri, 2005-02-25 at 02:21 +0100, Mateo Meier wrote:
> Hey Steven,
> 
> It's actully ISDN.. not a  analog line :)
> Will that change anything :) ?

Yes as I do not believe flash is something you can do on ISDN at all. 

What interface are you using? ZapBRI? if so you might be able to do the
hairpinning if it is supported.

> >> Been covered before, You can't do that on an analog line. Problem comes
> >> from where you are and what flash would be working on at that point. If
> >> you flash asterisk and get dialtone again, you are getting the dialtone
> >>  from asterisk. At this point the only channel being worked is the one
> >> you are on and flashing it won't help.
> 
> >>  What you would need to do is get the other leg of the call to make the
> >> flash. 
> 
> >> Of course if you where on a PRI link, you could do "hairpinning", "ect"
> >> or "tromboning" and get the call taken back by the PSTN and transferred
> >> to the new number.
> >> -- 
> >> Steven Critchfield <critch at basesys.com>

-- 
Steven Critchfield <critch at basesys.com>




More information about the asterisk-users mailing list