[Asterisk-Users] CallTransfer

[Adam Goryachev]

On Thu, 2005-02-24 at 10:20 +0200, Herman Cremer wrote:
> Hi 
> 
> I was wondering if there are any special settings that
> I need to be able to transfer calls.
> 
> Whenever I press the 'recall' button, I just here a click,
> and no ring-tone to transfer.
> in my debug log I get this :

Probably your phone uses too short flash time. You have a couple of
options, 
* change your phone to use a longer flash time
* change asterisk to accept a shorter flash time
* signal the flash some other way (ie, manually press the hook and lift
again
* Use the # key to do the transfer (requires the t or T on the dial
command

I ended up (finally) succeeding in the second option, which by editing
zaptel with this patch:

diff -ur zaptel/zaptel.h zaptel.mine/zaptel.h
--- zaptel/zaptel.h     Tue Nov 23 10:26:36 2004
+++ zaptel.mine/zaptel.h        Tue Nov 23 17:21:54 2004
@@ -863,7 +863,7 @@
 #define        ZT_DEFAULT_PULSEAFTERTIME 750   /* 750ms between dial
pulse digits */

 #define        ZT_MINPULSETIME (15 * 8)        /* 15 ms minimum */
-#define        ZT_MAXPULSETIME (150 * 8)       /* 150 ms maximum */
+#define        ZT_MAXPULSETIME (75 * 8)        /* 150 ms maximum */
 #define        ZT_PULSETIMEOUT ((ZT_MAXPULSETIME / 8) + 50)

 #define ZT_RINGTRAILER (50 * 8)        /* Don't consider a ring "over"
until it's been gone at least this

You should probably apply that manually, due to line wraps etc..

Would be nice if this was controlled from the config files...

Regards,
Adam
-- 
 -- 
Adam Goryachev
Website Managers
Ph:  +61 2 9345 4395                        adam at websitemanagers.com.au
Fax: +61 2 9345 4396                        www.websitemanagers.com.au