[Asterisk-Users] Trouble installing TE405P with asterisk@home

[Asterisk at Home]

did you try the auto-config? help-aah will tell you
how to do this.


--- BSDR <bsdr2 at netvision.net.il> wrote:

> I successfully installed asterisk at home 0.6, but when
> i try to load the
> wct4xxp module for the TE405P I just got, I get the
> following:
> 
> Found TE410P at base address fb7ffc00, remapped to
> e0220c00
> TE410P version c01a009b
> Tried to load 1c8ac800 into 00000000, but got
> 188ac800 instead
> Tried to load 1c8ac000 into 00000001, but got
> 188ac000 instead
> Tried to load 07fc07fc into 00000002, but got
> 03fc07fc instead
> FALC version: 00000005, Board ID: 00
> Reg 0: 0x188ac800
> Reg 1: 0x188ac000
> Reg 2: 0x03fc07fc
> Reg 3: 0x00000000
> Reg 4: 0x00000000
> Reg 5: 0x00000000
> Reg 6: 0xc01a009b
> Reg 7: 0x00001f00
> Reg 8: 0x00000000
> Reg 9: 0x00ff0000
> Reg 10: 0x00000000
> TE410P: Launching card: 0
> TE410P: Setting up global serial parameters
> Found a Wildcard: Wildcard TE410P-Xilinx
> Wildcard USB FXS Interface driver registered
> 
> This is if I haven't yet defined the channels in
> zatel.conf.
> If I define them the system starts scrolling the
> main console with messages
> like:
> Tried to load 1c8ac000 into 00000001, but got
> 188ac000 instead
> This goes on and on, and the only way to stop it is
> a hard reboot.
> 
> I don't think this is an IRQ problem - when I run
> cat /proc/interrupts I get
> this:
>            CPU0       CPU1
>   0:    1905021    1902517    IO-APIC-edge  timer
>   1:        119         77    IO-APIC-edge  keyboard
>   2:          0          0          XT-PIC  cascade
>   8:          1          0    IO-APIC-edge  rtc
>  12:       1196       1188    IO-APIC-edge  PS/2
> Mouse
>  14:          2          0    IO-APIC-edge  ide0
>  18:          0          0   IO-APIC-level  t4xxp
>  19:      14144      10091   IO-APIC-level  libata
>  20:       4208          0   IO-APIC-level  eth0
>  23:          0          0   IO-APIC-level  ehci-hcd
> NMI:          0          0
> LOC:    3807385    3807383
> ERR:          0
> MIS:          0
> 
> The system is a P4 3000 with 1GB RAM, Intel D915GAV
> Motherboard
> 
> Any help would be greatly appreciated.
> 
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>   
>
http://lists.digium.com/mailman/listinfo/asterisk-users
> 



		
__________________________________ 
Do you Yahoo!? 
Yahoo! Mail - 250MB free storage. Do more. Manage less. 
http://info.mail.yahoo.com/mail_250