[Asterisk-Users] Asterisk "no one is available to take your call"

[Lyle Giese]

It does not state it will dial forever.  Ring forever maybe.

You are posting portions of your extension.conf for outgoing calls from
Asterisk only.  I don't see anything here that is for incoming calls and
forwarding to 4607 when the call is not answered.

Lyle

----- Original Message ----- 
From: "Greg Oliver" <goliver at cistera.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Friday, February 18, 2005 3:58 PM
Subject: Re: [Asterisk-Users] Asterisk "no one is available to take your
call"


> True, but it also states that with no timeout value that it will dial
> until the caller hangs up.
>
> I have included my dial pattern - can anyone see anything that would
> cause this, or something in my sip.conf or h323.conf files that would
> override these settings?
>
> Thanks,
>
> Greg Oliver
>
> [outbound]
> exten => _4XXX,1,NoOp("Route to CCM1" ${EXTEN} )
> exten => _4XXX,2,Dial(H323/${EXTEN})
> exten => _4XXX,3,Congestion
>
> exten => _5XXX,1,NoOp("Route to CCM1" ${EXTEN} ) exten =>
> _5XXX,2,Dial(H323/${EXTEN})
> exten => _5XXX,3,Congestion
>
> exten => _9NXXXXXXXXX,1,NoOp("Route to CCM1" ${EXTEN})
> exten => _9NXXXXXXXXX,2,Dial(H323/${EXTEN})
>
> exten => _91NXXXXXXXXX,1,NoOp("Route to CCM1" ${EXTEN})
> exten => _91NXXXXXXXXX,2,Dial(H323/${EXTEN})
>
>
> default context includes outbound, and contexts in sip.conf and
> h323.conf are using default.  Like I say, call answered before ~5
> seconds are fine, other than that it is transferred to 4607..
>
> Howard Lowndes wrote:
> > On Wed, 2005-02-16 at 11:05, Greg Oliver wrote:
> >
> >>OK - I can successfully make calls from SIp phone through an asterisk
> >>323 channel to a Cisco Call Manager and out a MGCP controlled gateway.
> >>
> >>The problem is that if the call is not answered within ~5 seconds, *
> >>gives the message "no one is available to take your call" and
> >>disconnects the call.  If I answer b4 the 5 seconds - everything is good
.
> >>
> >>Anywhere I need to set to get around this.
> >>
> >>I have tried the t,T settings (even though the docs say no entry is
> >>forever) with no luck.
> >
> >
> > Read the doco on the Dial command again.  It's noting to do with the Tt
> > option, it's the parameter before that that you need to set to the
> > timeout
> >
> >>Thanks,
> >>
> >>Greg Oliver
> >>_______________________________________________
> >>Asterisk-Users mailing list
> >>Asterisk-Users at lists.digium.com
> >>http://lists.digium.com/mailman/listinfo/asterisk-users
> >>To UNSUBSCRIBE or update options visit:
> >>   http://lists.digium.com/mailman/listinfo/asterisk-users
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>