[Asterisk-Users] Uniden UIP200, please help
Robert Burcham
rob_burcham at yahoo.com
Sat Feb 19 09:00:27 MST 2005
Anyone using the UIP200 with *? I am having
difficulty getting the phone to register and *stay*
registered for more than 4 seconds.
The * console shows the UIP200 registering and records
the user agent. The UIP200 displays station name and
time on its LCD, then 4 seconds pass and it shows #1
DISCONNECTED. The * console reports no problem and
believes the device to still be registered.
A call can be placed from or received by the UIP200 if
it happens within the 4 seconds. Immediately upon
hanging up, it shows #1 DISCONNECTED.
I have tried firmware version 4.63 and 4.59.
My unidencom.txt (for 4.63):
# UIP200 Mass Configuration System Generic File
# Notes:
# 1. Lines start with '#' are comments
# 2. To leave a field value unchanged (as saved on
local phone), leave value to blank.
# 3. To set a field's value to empty, use '-' as
value.
# 4. To NOT overwrite user local settings of:
programmable key, one/two touch keys, VMA
# number, VMWILampIndicator, set
"OverwriteLocalSetting = NO". Default is "YES". This
# key will ALSO affect whether or not THESE
settings in uniden<MAC>.txt be used.
# 5. Any duplicate parameters exist in both
unidencom.txt and uniden<MAC>.txt, MAC settings
# will be used.
# MAXIMUM FILE SIZE IS 10KB
# Current Limitation: No spaces allowed for a
setting's value
# Version: BS4.63
#Overwrite user local settings of programmable keys,
one/two touch keys, vma settings
#If set to no, these current settings on the phone
will not be overwritten.
OverwriteLocalSettings YES # must be placed on
top of config file
# Sip Settings --If only ProxyServer needed, set
OutboundProxy1/Port same as ProxyServer/Port
ProxyServer 192.168.100.34 # can
be an IP address or FDQN
ProxyServerPort 0 # 0 to
use default port
OutboundProxy1 192.168.100.34 # can
be an IP address or FQDN
OutboundProxy1Port 0 #
enter a port number or 0 for default (5060)
OutboundProxy2 192.168.100.34 # can
be an IP address or FQDN
OutboundProxy2Port 0 #
enter a port number or 0 for default (5060)
EmergencyProxy 192.168.100.34
EmergencyProxyPort 0
Registrar1 192.168.100.34 # can
be an IP address or FQDN
Registrar1Port 0 #
enter a port number or 0 for default (5060)
Registrar2 192.168.100.34 # can
be an IP address or FQDN
Registrar2Port 0 #
enter a port number or 0 for default (5060)
RegisterExpireSec 3600
Q_Param 50
RegisterExpireLimitPercent 10
Register403RetrySec 1200
SipPort 5060
SRVRecordName - #_sip._udp.uniden.com
FailoverRetrySec 4 # For Redundant
Outbound proxy server
#InterDigitTimer Value in milli seconds (minimum is
1000ms = 1Second)
InterDigitTimer 4000
# options are ON or OFF
SessionTimerSupport ON
# options are ON or OFF
SessionTimerRefresher ON
SessionTimerMin 60
TimerInterval0 300
TimerInterval1 150
# Audio Settings
G711MuTxPacketLength 20
G711MuJitterBufferLength 10
G711MuJitterBufferMax 200
G711ATxPacketLength 20
G711AJitterBufferLength 10
G711AJitterBufferMax 200
G729TxPacketLength 20
G729JitterBufferLength 10
G729JitterBufferMax 200
LongHoldAlertPeriod 360
RTPPortBase 25000
# options are ON and OFF
DiffServMode OFF
DefaultDiffServParam 192
RTPDiffServParam 160
# options are TRUNKMODE, CASCADEMODE, DISABLE
VlanMode DISABLE
VlanID 1
PcVlanID 2
#SNTP Settings
# choices are YES and NO
EnableSNTP NO
# SNTP Server IP address
SntpServerIP 199.240.130.12 #
ntp1.kansas.net
TimeZone -6 # -6 For Central Time
Zone
# choices are YES and NO
EnableDST YES
# Time period (in seconds) before recontacting SNTP
server
SntpRetrySec 1800
# preferred codec are listed from most preferred,
separated by commas and NO space
PreferredCodec g711u,g711a,g729
# choices are English, Spanish, and French
Language English
#choices are Enable and Disable
CallWaiting Enable #
EmergencyProxyPrefix **
# STUN: If Server IP sis 0.0.0.0 STUN is disabled
StunServerAddr 0.0.0.0 #stun.fwdnet.net
StunServerPort 0 # 3478
#Periodic update in seconds of MEDIA NAT ports
(minimum is 10 and set 0 to disable)
StunServerUpdateSec 0 # 30
#Periodic update in seconds to keep SIP NAT port open
(minimum is 10 and set 0 to disable)
StunServerNATKeepAliveSec 0 # 30
# ALLOW IP DIALING with # as the first digit map
DirectIpDialing Enable #Enable/Disable
# Set YES to AllowSharpAsDial to have # as your DIAL
key.
AllowSharpAsDial No #Yes/No
#Flash Based Service Parameters:
# DTMFFlashEvent (Enable/Disable) -- Send RFC2833
Event 16 when enabled and XFER button is pressed.
DTMFFlashEvent Disable
#HotLineDisplay (Enable/Disable) -- Do not display
HOTLINE on LCD when Hotline Number is set
HotLineDisplay Disable
#User Agent Name Settings. Use Character "^" for space
UseCustomizedUserAgentName No
CustomizedUserAgentName
Uniden^Customized^UA
#Admin password must be numeric. Max is 6 digits.
Format: oldpassword/newpassword
#AdminPassword 1234/1111
#end_of_file
My uniden<mac>.txt (for 4.63):
# UIP200 Mass Configuration System Mac-based File
# Notes: Lines start with '#' are comments
# To leave a field value unchanged (as saved on local
phone), leave value to blank.
# To disable a field, use '-' as value
# MAXIMUM FILE SIZE IS 10KB
# Current Limitation: No spaces allowed for a
setting's value
# Version: BS4.63
# Firmware. The items listed in this Firmware section
must be in this order.
# FirmwareVersion and FirmwareFileName only used if
AutoFirmwareUpdate is YES
# FimrwareFileName only used if FirmwareVersion differ
from firmware ver in Flash
# Note: If you would like to perform firmware update
on ALL your UIP200's, you would
# want to move the 3 lines below to
unidencom.txt file, then you don't have to modify
# MAC-based files individually. Refer to
Users Manual for details.
AutoFirmwareUpdate YES #choices are
YES and NO
FirmwareFileName uip200_463enc.pac
FirmwareVersion BS4.63
# Sip Settings
MyLcdDisplay Rob's_Office
MyDialNumber rob_office
DisplayName rob_office
UserNameForProxy -
PasswordForProxy -
UserNameForRegistrar -
PasswordForRegistrar -
# Programmable Keys. Key functionality must go before
key values.
ProgrammableKey1 OneTouchDial
ProgrammableKey2 OneTouchDial
ProgrammableKey3 OneTouchDial
ProgrammableKey4 CallForward
ProgrammableKey5 TwoTouchDial
ProgrammableKey6 DoNotDisturb
ProgrammableKey7 VMA
ProgrammableKey8 Mute
# One and Two-touch keys. Must go after Programmable
keys functionality definitions.
# Refer to Programmable and Fixed Function Keys for
usage guide
# OneTouchKeyX value is used ONLY when
ProgrammableKeyX is OneTouchDial
OneTouchKey1 18005558355
OneTouchKey2 5553456
OneTouchKey3 3456
OneTouchKey4 3457
OneTouchKey5 3458
OneTouchKey6 918005558355
OneTouchKey7 3459
OneTouchKey8 3450
TwoTouchDigit0 3469
TwoTouchDigit1 3450
TwoTouchDigit2 4420
TwoTouchDigit3 4421
TwoTouchDigit4 4422
TwoTouchDigit5 4423
TwoTouchDigit6 4424
TwoTouchDigit7 4425
TwoTouchDigit8 4426
TwoTouchDigit9 4427
# Hotline and vmwi numbers --Must be placed after
OneTouchDial's
HotLineNumber -
VmaDirectCallNo 3685 #value associating
with VMA Programmable key.
VmwiLampIndicator Enable
TimeDisplay Enable
ImportPhoneBook No
#end of file
My sip.conf entry for this device (* 1.0.5):
[rob_office]
type=friend
host=dynamic
defaultip=192.168.100.204
;username=rob_office
;secret=1234
dtmfmode=rfc2833 ; Choices are inband, rfc2833, or
info
;mailbox=1000 ; Mailbox for message waiting indicator
context=sip
callerid="Rob's Office" <2122>
;nat=route
nat=never
;qualify=yes
;qualify=no
;canreinvite=yes
;canreinvite=no
;port=5060
I have seen no responses to my earlier post:
http://lists.digium.com/pipermail/asterisk-users/2005-February/089944.html
and my problem persists. Would someone please share
their configs and firmware versions?
Many thanks for any help, experiences shared.
Rob
__________________________________
Do you Yahoo!?
The all-new My Yahoo! - Get yours free!
http://my.yahoo.com
More information about the asterisk-users
mailing list