[Asterisk-Users] W&M Wink timings for Nortel

[Rich Adamson]

> Does anyone know the default E&M Wink timings for Nortel DID ports?
> 
> The default settings on Asterisk are:
> 
> ;    prewink:     Pre-wink time (default 50ms)
> ;    preflash:    Pre-flash time (default 50ms)
> ;    wink:        Wink time (default 150ms)
> ;    flash:       Flash time (default 750ms)
> ;    start:       Start time (default 1500ms)
> ;    rxwink:      Receiver wink time (default 300ms)
> ;    rxflash:     Receiver flashtime (default 1250ms)
> ;    debounce:    Debounce timing (default 600ms)

I'm confused. Digium cards do not support E&M trunks, which are older
interfaces that include either a two-wire or four-wire audio "plus"
two additional wires called the "E" and the "M" leads. So, Wink
timing is irrelevant (unless I'm misunderstanding your question).