[Asterisk-Users] Sangoma A104 - D-Channel problem

[Michael Bielicki]

upgrade to the following wanpipe and also upgrade the firmware o the
crd (it's included in the wanpipe softwaare)
ftp://ftp.sangoma.com/linux/custom/2.3.2/wanpipe-beta5g-2.3.2.tgz


On Thu, 17 Feb 2005 16:07:54 +0100, Kumak <kumak at exe.pl> wrote:
> 
> Hello,
> I have following problem with Sangoma A104 card:
> 
> CLI> pri show span 1
> Primary D-channel: 16
> Status: Provisioned, Down, Active
> Switchtype: EuroISDN
> Type: CPE
> Window Length: 0/7
> Sentrej: 0
> SolicitFbit: 0
> Retrans: 0
> Busy: 0
> Overlap Dial: 0
> T200 Timer: 1000
> T203 Timer: 10000
> T305 Timer: 30000
> T308 Timer: 4000
> T313 Timer: 4000
> N200 Counter: 3
> 
> NOTICE[16509]: chan_zap.c:7494 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
> NOTICE[16509]: chan_zap.c:7494 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
> NOTICE[16509]: chan_zap.c:7494 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
> NOTICE[16509]: chan_zap.c:7494 pri_dchannel: PRI got event: HDLC Abort (6) on Primary D-channel of span 1
> 
> Any idea how to fix it?
> 
> My configs:
> 
> zaptel.conf:
> 
> span=1,1,1,ccs,hdb3,crc4
> bchan=1-15,17-31
> dchan=16
> 
> zapata.conf
> 
> [channels]
> switchtype=euroisdn
> pridialplan=unknown
> overlapdial=no
> usecallerid=yes
> hidecallerid=yes
> callwaiting=no
> callwaitingcallerid=no
> threewaycalling=no
> transfer=no
> cancallforward=no
> callreturn=no
> jitterbuffers=4
> echocancel=yes
> echocancelwhenbridged=no
> echotraining=yes
> relaxdtmf=yes
> rxgain=0.5
> txgain=0.9
> immediate=no
> amaflags=billing
> adsi=no
> busydetect=no
> callprogress=no
> context = zapline1
> switchtype = euroisdn
> group=1
> signalling = pri_cpe
> channel => 1-15
> channel => 17-31
> 
> cat /proc/zaptel/1 :
> 
> Span 1: WPE1/0 "wanpipe1 card 0" HDB3//CRC4
> 
>            1 WPE1/0/1 Clear (In use)
>            2 WPE1/0/2 Clear (In use)
>            3 WPE1/0/3 Clear (In use)
>            4 WPE1/0/4 Clear (In use)
>            5 WPE1/0/5 Clear (In use)
>            6 WPE1/0/6 Clear (In use)
>            7 WPE1/0/7 Clear (In use)
>            8 WPE1/0/8 Clear (In use)
>            9 WPE1/0/9 Clear (In use)
>           10 WPE1/0/10 Clear (In use)
>           11 WPE1/0/11 Clear (In use)
>           12 WPE1/0/12 Clear (In use)
>           13 WPE1/0/13 Clear (In use)
>           14 WPE1/0/14 Clear (In use)
>           15 WPE1/0/15 Clear (In use)
>           16 WPE1/0/16 HDLCFCS (In use)
>           17 WPE1/0/17 Clear (In use)
>           18 WPE1/0/18 Clear (In use)
>           19 WPE1/0/19 Clear (In use)
>           20 WPE1/0/20 Clear (In use)
>           21 WPE1/0/21 Clear (In use)
>           22 WPE1/0/22 Clear (In use)
>           23 WPE1/0/23 Clear (In use)
>           24 WPE1/0/24 Clear (In use)
>           25 WPE1/0/25 Clear (In use)
>           26 WPE1/0/26 Clear (In use)
>           27 WPE1/0/27 Clear (In use)
>           28 WPE1/0/28 Clear (In use)
>           29 WPE1/0/29 Clear (In use)
>           30 WPE1/0/30 Clear (In use)
>           31 WPE1/0/31 Clear (In use)
> 
> Information from dmesg:
> 
> Processing WAN device wanpipe1...
> wanpipe1: Locating: A104 card, CPU A, PciSlot=8, PciBus=0
> wanpipe1: Found: A104 card, CPU A, PciSlot=8, PciBus=0, Port=0
> PCI: Found IRQ 10 for device 00:08.0
> wanpipe1: AFT PCI memory at 0xEE000000
> wanpipe1: IRQ 10 allocated to the AFT PCI card
> wanpipe1: Initializing for SMP
> wanpipe1: Starting AFT Quad Hardware Init.
> wanpipe1: Enabling front end link monitor
> wanpipe1: Global Chip Configuration: used=1
> wanpipe1: Global Front End Configuraton!
> wanpipe1: T1/E1/J1 Global configuration!
> wanpipe1: AFT Data Mux Bit Map: 0x76543210
> wanpipe1: Setting E1 configuration (Port 1)!
> wanpipe1: All channels enabled
> wanpipe1: Front end successful
> wanpipe1: AFT Security: UnChannelised
> wanpipe1: Configuring Device   :wanpipe1  FrmVr=8
> wanpipe1:    Global MTU   = 1500
> wanpipe1:    Global MRU   = 1500
> wanpipe1:    Data Mux Map = 0x76543210
> wanpipe1: Configuring Interface: w1g1
> wanpipe1:w1g1: Running in TDM Voice mode.
> wanpipe1: AFT Fifo Level Map: 0x02082082
> wanpipe1: Registering interface to Zaptel span # 1!
> wanpipe1:    MRU           :248
> wanpipe1:    MTU           :248
> wanpipe1:    HDLC Eng      :Off (Transparent)
> wanpipe1:    Data Mux Ctrl :On
> wanpipe1:w1g1: Active channels = 0xFFFFFFFE
> wanpipe1:w1g1: Setting first time slot to 1
> wanpipe1:w1g1: Config for Transparent mode: Idle=0 Len=248
> wanpipe1:w1g1: Allocating 65 dma skb len=256 Chaining=Off
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 


-- 
Michal Bielicki
http://www.asterisk.com.pl/