[Asterisk-Users] Trying to install X100P

Rich Adamson radamson at routers.com
Thu Feb 17 14:15:26 MST 2005


> I have just got my X100p card and am trying to install it.
> 
> I have built and installed the zaptel drivers without any apparent errors
> and I am now trying to get them working. I have the following in config
> files
> 
> In /etc/zaptel.conf
>   fxsks=1
> 
> In /etc/asterisk/zapata.conf
>   signalling=fxs_ks
>   context=default
>   channel => 1
> 
> Now when I try ti modprobe the drivers this is what happens:
> 
> Command:
>   modprobe zaptel
> /var/log/messages: 
>  Feb 17 20:47:43 desk kernel: zaptel: no version for "struct_module" found:
> kernel tainted. 
>  Feb 17 20:47:43 desk kernel: Zapata Telephony Interface Registered on major
> 196
> 
> Command:
>   modprobe wcfxo
> /var/log/messages:
>   Feb 17 20:48:18 desk kernel: PCI: Found IRQ 9 for device 0000:01:0b.0
>   Feb 17 20:48:18 desk kernel: PCI: Sharing IRQ 9 with 0000:00:1f.2
>   Feb 17 20:48:18 desk kernel: wcfxo: DAA mode is 'FCC'
>   Feb 17 20:48:18 desk kernel: Found a Wildcard FXO: Generic Clone
>   Feb 17 20:48:18 desk kernel: Registered tone zone 4 (United Kingdom)
> 
> Command:
>   ztcfg
> /var/log/messages:
>   [nothing!]
> 
> Now - there does not appear to be a Zap/1 device available in
> extensions.conf as I would expect. Nor does anything happen when I ring the
> line connected to the X100p. What have I missed?

Try "ztcfg -vvv" when you're doing the above. Might add some clues.

After the modprobe, might do a 'lsmod' to see what was loaded.





More information about the asterisk-users mailing list