[Asterisk-Users] Using zaphfc and wcte11xp at the same time problem

[Rob Scott]

I am having problems loading the zaphfc from bristuff and wcte11xp
drivers at the same time.
If I load zaphfc then all works fine.
If I then load wcte11xp, the card using the zaphfc doesn't pick up calls
anymore.
I am using bristuff 0.2.0-RC5.

Anyone else seen this problem, know of a fix, or can tell me what I am
doing wrong?

Thanks

My zaptel.conf:

# hfc-s pci a span definition
# most of the values should be bogus because we are not really zaptel
loadzone=nl
defaultzone=nl

span=1,1,3,ccs,ami
bchan=1-2
dchan=3

span=2,0,0,ccs,hdb3,crc4
bchan=4-18
dchan=19
bchan=20-34

My zapata.conf:

;
; Zapata telephony interface
;
; Configuration file

[channels]

rxgain = 5.0
txgain = 5.0

switchtype = euroisdn
pridialplan=local
prilocaldialplan=local
usecallerid=yes
echocancel=yes
immediate=yes

; p2mp TE mode
signalling = bri_cpe_ptmp
group = 1
Context = fromzap
channel => 1-2

signalling = pri_net
group = 2
context = fromzap
channel => 4-18,20-34