[Asterisk-Users] *ASTERISK* Install and configure Step by Step.

[Max]

Hello, Thanks for Help!

when try to install Asterisk at home powered by CEntOS
normal boot, 3 minutes latter:

"You are using unsupported hardware by CentOS,  press OK" if press OK reboot.

I increment mor ram and CPU:

CPU K6II- 500Mhz
196Ram 
HD 20GB 
Lan cart 10/100Mb
Fax modem genius (Lucent chipset)
Fax Modem USR 33.66
Sound OnBoard
Disk Driver 1.44

CD 52X


How to instal on text mode?


regards!

Max Rivera
Fprm Brazil.




  ----- Original Message ----- 
  From: dean collins 
  To: Max 
  Sent: Tuesday, February 01, 2005 9:55 PM
  Subject: RE: [Asterisk-Users] *ASTERISK* Install and configure Step by Step.


  You have enough in your hardware to run this (just)

   

  When the cd first installs it will then reboot and do something called "run once"

   

  Basically this is all of the scripts running.

   

  You need to wait!!!! On my p3 700 with 512 it takes about 20 minutes so you might need to wait an hour.

   

  Try again.

   

  Cheers,

  Dean

   


------------------------------------------------------------------------------

  From: Max [mailto:max at megabr.net] 
  Sent: Tuesday, February 01, 2005 6:41 PM
  To: dean collins
  Subject: Re: [Asterisk-Users] *ASTERISK* Install and configure Step by Step.

   

  Thanks for answer !

   

  I try to install burn Cd from ISO (asterisk at home)

  and  this work well on Atlhon 1.0 but 

   

  on my small hardware this is not runing, normal boot, I see first screen "press enter or wait" later reboot automatically, and never complete... :( 

   

  also this not work with 128RAM and K6II 500CPU

   

   

  Max Rivera

   

   

    ----- Original Message ----- 

    From: dean collins 

    To: max at megabr.net 

    Sent: Tuesday, February 01, 2005 9:33 PM

    Subject: FW: [Asterisk-Users] *ASTERISK* Install and configure Step by Step.

     

    Max, you should start with the asterisk at home iso.

     

    It installs asterisk automatically and is truly the best automated solution.

     

    Cheer

     

     


----------------------------------------------------------------------------

    From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Max
    Sent: Tuesday, February 01, 2005 5:37 PM
    To: Asterisk Users Mailing List - Non-Commercial Discussion
    Subject: [Asterisk-Users] *ASTERISK* Install and configure Step by Step.

     

    Hello!

     

    I am Begining in the ASTERISK IP-PABX  world, and here in Brazil, have not any Help to install and configure, 

     

    If you know about any Good LINK contend HOW TO install and configure Asterisk to this hardware(minimal)

     

    OR  if exist mini linux distro run asterisk in RAM, (similar at coyotelinux.com)

     

    bienvenidas todas las ideas! 


    INTEL MMX CPU 166Mhz
    32MB Ram 
    HD 20GB 
    Lan cart 10/100Mb
    Fax modem genius (Lucent chipset)
    Fax Modem USR 33.66
    Sound OnBoard

    Disk Driver 1.44

    CD 52X

     

     

    I need Send to my PABX, using only 1 FXS port all incoming Calls from Internet I have multiple SIP servers and providers(6 ip lines, vitual numbers)

    this is Posible using asterisk?

     

    Thanks in advace,

     

    Max Rivera

     

     


----------------------------------------------------------------------------

    _______________________________________________
    Asterisk-Users mailing list
    Asterisk-Users at lists.digium.com
    http://lists.digium.com/mailman/listinfo/asterisk-users
    To UNSUBSCRIBE or update options visit:
       http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050202/e4df9b1d/attachment.htm