[Asterisk-Users] How to set features.conf to change thehangup key.

[Obelix]

Quoting Bogdan Moldovan <bogdan.moldovan at modulo.ro>:

Is there a means of monitoring the call for that sequence of keys then hanging
up the call if they are detected?




> Indeed, this is 1.2.1
>
> But do the following:
>
> Go to the source tree, do a
> vi res/res_features.c
>
> Search for a :
> struct ast_call_feature builtin_features[]
>
> And you should see the builtin features:
>
> In 1.2.1 I have:
>
> #define FEATURES_COUNT (sizeof(builtin_features) /
> sizeof(builtin_features[0]))
> struct ast_call_feature builtin_features[] =
>  {
>         { AST_FEATURE_REDIRECT, "Blind Transfer", "blindxfer", "#", "#",
> builtin_blindtransfer, AST_FEATURE_FLAG_NEEDSDTMF },
>         { AST_FEATURE_REDIRECT, "Attended Transfer", "atxfer", "", "",
> builtin_atxfer, AST_FEATURE_FLAG_NEEDSDTMF },
>         { AST_FEATURE_AUTOMON, "One Touch Monitor", "automon", "", "",
> builtin_automonitor, AST_FEATURE_FLAG_NEEDSDTMF },
>         { AST_FEATURE_DISCONNECT, "Disconnect Call", "disconnect", "*", "*",
> builtin_disconnect, AST_FEATURE_FLAG_NEEDSDTMF },
> };
>
> In case you do not have this, good changes are that, in case you need badly
> this feature, you will upgrade or tweak the sources...
>
> Bogdan
>
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Obelix
> Sent: Saturday, December 31, 2005 6:07 PM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: RE: [Asterisk-Users] How to set features.conf to change thehangup
> key.
>
> Quoting Bogdan Moldovan <bogdan.moldovan at modulo.ro>:
>
> Does this option work with Asterisk 1.07? I tried it and it didn't work
>
> > In features.conf
> >
> > [featuremap]
> > automon => *1                  ; One Touch Record
> > atxfer => *2
> > disconnect => *97  ; this is just an example
> >
> > Bogdan
> >
> > -----Original Message-----
> > From: asterisk-users-bounces at lists.digium.com
> > [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Obelix
> > Sent: Saturday, December 31, 2005 4:52 PM
> > To: Asterisk Users Mailing List - Non-Commercial Discussion
> > Subject: [Asterisk-Users] How to set features.conf to change the hangup
> key.
> >
> >
> >
> > I want to modify features.conf to set a different key to hang up call.
> > Rather than the usual * key. I gather it involves some application map
> > settings etc.
> >
> > Does anyone have a clue? I have read the docs but can hardly find any
> > examples.
> >
> > Regards
> >
> > Obelix
> >
> > ----------------------------------------------------------------
> > This message was sent using IMP, the Internet Messaging Program.
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> >    http://lists.digium.com/mailman/listinfo/asterisk-users
> >
>
>
>
>
> ----------------------------------------------------------------
> This message was sent using IMP, the Internet Messaging Program.
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>




----------------------------------------------------------------
This message was sent using IMP, the Internet Messaging Program.