[Asterisk-Users] TDM2400 wierdness

[Roger Hill]

Kerry:

I hope this helps.

I had EXACTLY the same symptom when I was trying to get an X100P clone 
to work yesterday. Bumping the toneduration parameter in zapata.conf to 
200 milliseconds cured the problem.

Roger

Kerry Garrison wrote:

>Asterisk 1.2.1
>Updated the TDM2400 driver over the weekend
>
>Incoming calls seem to work perfectly
>
>Outbound calls never connect. If you listen in on the call to a 7 digit
>local number, you hear the first 6 digits, then a small delay, then the last
>digit. Then there is a long pause before the line is picked up, then a very
>long pause before the telco fires back "you call could not be completed at
>this time". Calling using an analog phone on that line works fine.
>
>Do I possibly have some DTMF issues or something like that? Any suggestions
>would be appreciated. This is my only installation with the TDM2400 so I am
>kind of at a loss.
>
>Kerry Garrison
>Director of Technical Services
>Tech Data Pros - Orange County's Mobile IT Service Provider
>(949) 502-7819 x200 - kerryg at techdatapros.com http://www.techdatapros.com
>
>
>
>_______________________________________________
>--Bandwidth and Colocation provided by Easynews.com --
>
>Asterisk-Users mailing list
>To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
>  
>

-- 
########################################################
Roger Hill				07739 707 180
Perseverance is the hard work you do after you get
tired of doing the hard work you already did.
########################################################