[Asterisk-Users] Driver not configuring correctly on TE210P for CCS

[Paul Liew]

Hi Alex,

Have you checked that your jumper setting on the card has been shorted
for E1. Its open by default to T1 - which overrides your zaptel.conf
settings.

Cheers,
Paul


Alex Barnes wrote:
> Dec 28 12:51:55 caudi_apx1 kernel: TE2XXP: Launching card: 0
> Dec 28 12:51:55 caudi_apx1 kernel: TE2XXP: Setting up global serial parameters
> Dec 28 12:51:56 caudi_apx1 kernel: Found a Wildcard: Wildcard TE210P
> Dec 28 12:51:56 caudi_apx1 kernel: About to enter spanconfig!
> Dec 28 12:51:56 caudi_apx1 kernel: Done with spanconfig!
> Dec 28 12:51:56 caudi_apx1 kernel: Registered tone zone 4 (United Kingdom)
> Dec 28 12:51:56 caudi_apx1 kernel: About to enter startup!
> Dec 28 12:51:56 caudi_apx1 kernel: TE2XXP: Span 1 configured for ESF/B8ZS
> Dec 28 12:51:56 caudi_apx1 kernel: wct2xxp: Setting yellow alarm on span 1
> 
> etc/zaptel.conf
> 
> # Define the E210P
> span=1,1,0,ccs,hdb3,crc4
> bchan=1-8
> dchan=16
> unused=9-15,17-31
> 
>  
> 
> ztcfg:
> 
> [root at caudi_apx1 ~]# ztcfg -vvv -d 2
> Line 154: loadzone=uk
> Line 162: defaultzone=uk
> Line 224: span=1,1,0,ccs,hdb3,crc4
> Line 225: bchan=1-8
> Line 226: dchan=16
> Line 227: unused=9-15,17-31
> <End of File>
> 
-- 
www.austechpartnerships.com
t) +61 (0)3 9221 0888
SIP) 9999 at sip.austechpartnerships.com
IAX) 9999 at sip.austechpartnerships.com
IAXtel) 1700-482-8273
ATP Centrex) 9999