[Asterisk-Users] Cisco dtmf

[Greg Oliver]

I use:

# Enable_VAD (1-enabled, 0-disabled)
enable_vad: "0"
dtmf_inband: "1"
dtmf_outofband: "never"
dtmf_avt_payload: "101"

and it works well for me.  Sometimes going through a callmanager I have
to set outofband to avt to get dialtone sent though.

On Tue, 2005-12-27 at 16:05 +0100, Tomislav Parcina wrote:
> I'm trying to set up call transfer and automon options. They work fine 
> with ZAP lines (analog telephone) and with Grandstream Budgetone 102. I 
> have problem with Cisco 7905 and 7940. I think that problem is with dtmf 
> signalization. 
> 
> This is my configuration in 7940 
> dtmf_inband: 1
> dtmf_outofband: none	
> dtmf_db_level: 3
> 
> And 7905
> AudioMode:0x00000000
> 
> Is my configuration wrong or it doesn't work with Cisco phones?
> 
> Thank you for your time!
> 
>