[Asterisk-Users] tdm400 fxo problem

[Kerry Garrison]

Possible polarity problem with the jack.
-Kerry
 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Filippo Carone
Sent: Friday, December 23, 2005 2:16 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] tdm400 fxo problem


Hi,
I'm experiencing a very weird behaviour with my tdm400 with two fxo and one
fxs modules. I setup my current configuration at home, I tried it and it
works flawlessly. I moved the computer to my office and plugged the fxo to
the wall plug, but when I tried to call I got a busy signal. I attached the
same wire to a phone, I called again and the phone rang. I tried with both
the fxo ports, but I always got a busy signal and on the CLI Asterisk
doesn't notice the incoming call at all. Outgoing calls do not work either. 
So I moved again the computer to the home of a friend, and it there it works
too as it does at my place. When I plugged the TDM at the office no other
phone was plugged in the whole structure.

I'm really puzzled and I don't know why it is behaving this way. Any hints? 

Cheers,
fc


-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051223/938a19a6/attachment.htm