[Asterisk-Users] Asterisk with Uniden uip200
Waldo Rubinstein
waldo at trianet.net
Mon Dec 19 21:02:20 MST 2005
I've found that I have to disable quality on the UIP200 when I
switched to Asterisk 1.2.X. It worked find with 1.0.9 and under.
Which version of Asterisk are you using?
- Waldo
On Dec 19, 2005, at 10:34 PM, Steven Job wrote:
> Having the strangest time getting the uip200 to work with Asterisk.
> We can send outgoing calls, however we can not receive phone calls.
>
> I have tried listening to all of the recommendations in this list
> such as
> setting the nat=never in the sip.conf and that didn't work at all
> (phone
> stopped registering).
>
> Anyone want to be so kind and let me know what the heck we are
> doing wrong?
>
> The asterisk server is located on a static public IP.
> The uip200 phones are at a dynamic public IP (different location
> than the
> asterisk machine) but are behind a router using NAT.
>
>
> When the phone first authenticates we get:
>
> -- Registered SIP 'uip200-2a' at 141.156.50.142 port 64996
> expires 3600
> Dec 19 22:26:59 NOTICE[5436]: chan_sip.c:11328 sip_poke_noanswer: Peer
> 'uip200-2a' is now UNREACHABLE! Last qualify: 0
>
>
> Then when you try to dial the extension of the phone we get:
>
> Dec 19 22:29:01 NOTICE[16860]: app_dial.c:1010 dial_exec_full:
> Unable to
> create channel of type 'SIP' (cause 3 - No route to destination)
> == Everyone is busy/congested at this time (1:0/0/1)
>
>
> Thanks for any help!
> -Steve
>
>
>
> ------sip.conf ------------------
>
> [uip200-2a]
> type=friend
> secret=verysecret
> nat=yes ; have also tried nat=never and nat=route
> host=dynamic
> reinvite=no
> canreinvite=no
> qualify=1000
> dtmfmode=auto ; Choices are inband, rfc2833, or info
> dtmf=auto
> disallow=all
> allow=ulaw
> allow=alaw
> context=internal
>
>
>
> ----------------- unidencom.txt
> ---------------------------------------
>
> # UIP200 Mass Configuration System Generic File
> # Notes:
> # 1. Lines start with '#' are comments
> # 2. To leave a field value unchanged (as saved on local phone),
> leave value
> to blank.
> # 3. To set a field's value to empty, use '-' as value.
> # 4. To NOT overwrite user local settings of: programmable key, one/
> two
> touch keys, VMA
> # number, VMWILampIndicator, set "OverwriteLocalSetting = NO".
> Default is
> "YES". This
> # key will ALSO affect whether or not THESE settings in
> uniden<MAC>.txt
> be used.
> # 5. Any duplicate parameters exist in both unidencom.txt and
> uniden<MAC>.txt, MAC settings
> # will be used.
> # MAXIMUM FILE SIZE IS 10KB
> # Current Limitation: No spaces allowed for a setting's value
> # Version: BS4.70
>
>
> #Overwrite user local settings of programmable keys, one/two touch
> keys, vma
> settings
> #If set to no, these current settings on the phone will not be
> overwritten.
> OverwriteLocalSettings YES # must be placed on top of
> config file
>
> # Sip Settings --If only ProxyServer needed, set OutboundProxy1/
> Port same as
> ProxyServer/Port
> ProxyServer serveraddress # can be an IP
> address or
> FDQN
> ProxyServerPort 0 # 0 to use default port
> OutboundProxy1 serveraddress # can be an IP
> address or
> FQDN
> OutboundProxy1Port 0 # enter a port
> number or 0
> for default (5060)
> #OutboundProxy2 192.168.0.2 # can be an IP
> address or
> FQDN
> #OutboundProxy2Port 0 # enter a port number or 0 for
> default
> (5060)
> #EmergencyProxy 192.168.1.102
> #EmergencyProxyPort 0
> Registrar1 serveraddress # can be an IP
> address
> or FQDN
> Registrar1Port 0 # enter a port
> number or 0
> for default (5060)
> #Registrar2 10.15.15.127 # can be an IP
> address or
> FQDN
> #Registrar2Port 0 # enter a port
> number or 0
> for default (5060)
>
> RegisterExpireSec 3600
> Q_Param 50
> RegisterExpireLimitPercent 10
> Register403RetrySec 1200
> SipPort 5060
> SRVRecordName - #_sip._udp.uniden.com
>
> FailoverRetrySec 4 # For Redundant Outbound proxy server
>
> #InterDigitTimer Value in milli seconds (minimum is 1000ms = 1Second)
> InterDigitTimer 4000
>
> # options are ON or OFF
> SessionTimerSupport ON
>
> # options are ON or OFF
> SessionTimerRefresher ON
> SessionTimerMin 60
> TimerInterval0 300
> TimerInterval1 150
>
>
> # Audio Settings
> G711MuTxPacketLength 20
> G711MuJitterBufferLength 10
> G711MuJitterBufferMax 200
> G711ATxPacketLength 20
> G711AJitterBufferLength 10
> G711AJitterBufferMax 200
> G729TxPacketLength 20
> G729JitterBufferLength 10
> G729JitterBufferMax 200
> LongHoldAlertPeriod 360
> RTPPortBase 25000
>
> # options are ENABLE and DISABLE
> DiffServMode ENABLE
> DefaultDiffServParam 40
> RTPDiffServParam 41
>
> # options are TRUNKMODE, CASCADEMODE, DISABLE
> VlanMode DISABLE
> VlanID 1
> PcVlanID 2
>
> #SNTP Settings
> # choices are YES and NO
> EnableSNTP yes
> # SNTP Server IP address
> SntpServerIP 192.5.41.40
> TimeZone -6 # -6 For Central Time Zone
> # choices are YES and NO
> EnableDST YES
> # Time period (in seconds) before recontacting SNTP server
> SntpRetrySec 1800
>
> # preferred codec are listed from most preferred, separated by
> commas and NO
> space
> PreferredCodec g711u,g711a,g729
>
> # choices are English, Spanish, and French
> Language English
>
> #choices are Enable and Disable
> CallWaiting Enable #
> EmergencyProxyPrefix **
>
> # STUN: If Server IP sis 0.0.0.0 STUN is disabled
> StunServerAddr 0.0.0.0 # stun.softjoys.com #
> stun.fwdnet.net # I
> have tried both of theve stun servers
> StunServerPort 0 # 3478 # i have tried the port 3478 also
> #Periodic update in seconds of MEDIA NAT ports (minimum is 10 and
> set 0 to
> disable)
> StunServerUpdateSec 0 # 30
> #Periodic update in seconds to keep SIP NAT port open (minimum is
> 10 and set
> 0 to disable)
> StunServerNATKeepAliveSec 0 # 30
>
> # ALLOW IP DIALING with # as the first digit map
> DirectIpDialing Enable #Enable/Disable
>
> # Set YES to AllowSharpAsDial to have # as your DIAL key.
> AllowSharpAsDial Yes #Yes/No
>
> #Flash Based Service Parameters:
> # DTMFFlashEvent (Enable/Disable) -- Send RFC2833 Event 16 when
> enabled and
> XFER button is pressed.
> DTMFFlashEvent Disable
> #HotLineDisplay (Enable/Disable) -- Do not display HOTLINE on LCD when
> Hotline Number is set
> HotLineDisplay Disable
>
> #User Agent Name Settings. Use Character "^" for space
> UseCustomizedUserAgentName No
> CustomizedUserAgentName Uniden^Customized^UA
>
>
> #Admin password must be numeric. Max is 6 digits. Format:
> oldpassword/newpassword
> #AdminPassword 1234/1111
>
> #end_of_file
>
>
>
>
>
> --------- uniden<mac>.txt ---------------
>
> # UIP200 Mass Configuration System Mac-based File
> # Notes: Lines start with '#' are comments
> # To leave a field value unchanged (as saved on local phone), leave
> value to
> blank.
> # To disable a field, use '-' as value
> # MAXIMUM FILE SIZE IS 10KB
> # Current Limitation: No spaces allowed for a setting's value
> # Version: BS4.70
>
>
> # Firmware. The items listed in this Firmware section must be in
> this order.
> # FirmwareVersion and FirmwareFileName only used if
> AutoFirmwareUpdate is
> YES
> # FimrwareFileName only used if FirmwareVersion differ from
> firmware ver in
> Flash
> AutoFirmwareUpdate YES #choices are YES and NO
> FirmwareFileName uip200_470enc.pac
> FirmwareVersion BS4.70
>
>
> # Sip Settings
> MyLcdDisplay uip2a
> MyDialNumber uip200-2a
> DisplayName uip2a
> UserNameForProxy uip200-2a
> PasswordForProxy verysecret
> UserNameForRegistrar uip200-2a
> PasswordForRegistrar verysecret
>
> # Programmable Keys. Key functionality must go before key values.
> ProgrammableKey1 OneTouchDial
> ProgrammableKey2 OneTouchDial
> ProgrammableKey3 OneTouchDial
> ProgrammableKey4 CallForward
> ProgrammableKey5 TwoTouchDial
> ProgrammableKey6 DoNotDisturb
> ProgrammableKey7 VMA
> ProgrammableKey8 Mute
>
> # One and Two-touch keys. Must go after Programmable keys
> functionality
> definitions.
> # Refer to Programmable and Fixed Function Keys for usage guide
> # OneTouchKeyX value is used ONLY when ProgrammableKeyX is
> OneTouchDial
> OneTouchKey1 95558111111
> OneTouchKey2 5553456
> OneTouchKey3 3456
> OneTouchKey4 3457
> OneTouchKey5 18175553152
> OneTouchKey6 18175553152
> OneTouchKey7 18175553152
> OneTouchKey8 18175553152
>
> TwoTouchDigit0 3459
> TwoTouchDigit1 3450
> TwoTouchDigit2 4420
> TwoTouchDigit3 4421
> TwoTouchDigit4 4422
> TwoTouchDigit5 4423
> TwoTouchDigit6 4424
> TwoTouchDigit7 4425
> TwoTouchDigit8 4426
> TwoTouchDigit9 4427
>
> # Hotline and vmwi numbers --Must be placed after OneTouchDial's
> HotLineNumber -
> VmaDirectCallNo 3685 #value associating with VMA
> Programmable
> key.
> VmwiLampIndicator Enable
>
> TimeDisplay Enable
> ImportPhoneBook No
>
> #end of file
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list