[Asterisk-Users] [helpp] Problem in astersik

[Jaime Lopez]

On 12/12/05, Talat Ishtiaq <talat at thespinnakers.com> wrote:
> Hi Kiss
>
> I am trying to run it on p3 machine i think it should be enough

Sure, but if you got asterisk precompiled with optimizations for PIV
for instance, it won't work.
If you compiled asterisk yourself, be sure you're not using any flags
for a higher processor . Also check youre not using any precompiled
asterisk modules that might have been compiled for a higher class
processor (g723 for instance).

>
>
> Regard
> Talat
>
>
> On Mon, 2005-12-12 at 12:18 +0100, Kiss Karoly wrote:
> > Hello,
> >
> > This looks like the asterisk you are using was compiled for a higher class
> > CPU then the one running it.
> >
> > Regards
> > Kiss Karoly
> >
> > On Mon, 12 Dec 2005, Talat Ishtiaq wrote:
> >
> > > Date: Mon, 12 Dec 2005 15:48:11 +0500
> > > From: Talat Ishtiaq <talat at thespinnakers.com>
> > > To: Mark Edwards <mark.p.edwards at gmail.com>
> > > Cc: Asterisk Users Mailing List - Non-Commercial Discussion
> > >     <asterisk-users at lists.digium.com>
> > > Subject: Re: [Asterisk-Users] [helpp] Problem in astersik
> > >
> > > Hi Mark
> > >
> > >
> > > The
> > >
> > > #/usr/sbin/astersik -vc
> > > -------------------(many verbosity)
> > > Illegal instruction
> > > [root at test postfix]# /usr/sbin/asterisk
> > > [root at test postfix]# /usr/sbin/asterisk -rvvvv
> > > Unable to connect to remote asterisk
> > >
> > > still give me illegal instruction in the end.
> > >
> > >
> > > As long as i remember i did not get any error during make and make
> > > install command.
> > > What packages do you want me to update on my fedora core 3 machine
> > > Plz tell me
> > >
> > >
> > > Regard
> > > Talat
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > >
> > > On Mon, 2005-12-12 at 21:16 +1100, Mark Edwards wrote:
> > >> Hi.
> > >>
> > >> First off, the illegal instruction doesn't look at all pretty.
> > >>
> > >> The best way to start a new installation is to start asterisk thus:
> > >>
> > >> /usr/sbin/asterisk -vc
> > >>
> > >> when you get a clean start with no fatal or significant errors, you
> > >> can close it out and then start it as a daemon
> > >>
> > >> /usr/sbin/asterisk
> > >>
> > >> Only then can you use "-r" to connect to the remote console.
> > >>
> > >> I would suggest if you are having "illegal instruction' messages, then
> > >> asterisk isn't starting cleanly, and you have a significant
> > >> compilation issue on your hands.
> > >>
> > >> I would make sure your FC3 box is up2date and that you are not seeing
> > >> any significant compilation errors first.
> > >>
> > >> Once you have got things going this far, we can then look at your
> > >> dialplan...
> > >>
> > >> cheers,
> > >>
> > >> Mark
> > >>
> > >> On 12/12/05, Talat Ishtiaq <talat at thespinnakers.com> wrote:
> > >>         Hi I am very new to asterisk
> > >>
> > >>         I am facing some problems
> > >>         I have installed asterisk on my fedora core 3 by tar.gz
> > >>         by
> > >>         #cd /usr/local
> > >>         #tar -xzvf asterisk----.tar.gz
> > >>         #make
> > >>         #make install
> > >>         #make samples
> > >>         i made following changes in the sip.conf and extention.conf
> > >>         In sip.conf
> > >>         [500]
> > >>         context=fromsip
> > >>         type=friend
> > >>         username=500
> > >>         secret=shanee
> > >>         callerid="shanee" <500>
> > >>         host=dynamic
> > >>         nat=yes
> > >>         canreinvite=no
> > >>         disallow=all
> > >>         allow=ulaw
> > >>         dtmfmode=info
> > >>         callgroup=3
> > >>         pickupgroup=3
> > >>         qualify=1000
> > >>
> > >>
> > >>         [501]
> > >>         context=fromsip
> > >>         type=friend
> > >>         username=501
> > >>         secret=shanee
> > >>         callerid="shanee" <501>
> > >>         host=dynamic
> > >>         nat=yes
> > >>         canreinvite=no
> > >>         disallow=all
> > >>         allow=ulaw
> > >>         dtmfmode=info
> > >>         callgroup=3
> > >>         pickupgroup=3
> > >>         qualify=1000
> > >>
> > >>         In externsion.conf
> > >>         [fromsip]
> > >>         exten => s,1,Answer( )
> > >>         exten => _5XX,1,Dial(SIP/${EXTEN},100,tr)
> > >>         exten => h,1,Hangup
> > >>         exten => t,1,Hangup
> > >>         exten => i,1,Hangup
> > >>
> > >>         Then What i did is
> > >>         [root at test asterisk]# asterisk -rvvv
> > >>         Unable to connect to remote asterisk
> > >>         [root at test asterisk]# asterisk -c
> > >>         Asterisk 1.0.9, Copyright (C) 1999-2004 Digium.
> > >>         Written by Mark Spencer <markster at digium.com>
> > >>         =========================================================================
> > >>         [ Booting...................................................Dec 10
> > >>         07:09:47 WARNING[865]: chan_oss.c:257 sound_thread: Read error
> > >>         on sound
> > >>         device: Resource temporarily unavailable
> > >>         ...........Dec 10 07:09:47 WARNING[865]: chan_mgcp.c:4050
> > >>         reload_config:
> > >>         Unable to get our IP address, MGCP disabled
> > >>         ...Dec 10 07:09:47 WARNING[865]: chan_skinny.c:2587
> > >>         reload_config:
> > >>         Unable to get our IP address, Skinny disabled
> > >>         ........................Illegal instruction
> > >>
> > >>
> > >>
> > >>         I gave these error to forum and i got reply that you should
> > >>         unload the
> > >>         mgcp and skinny modules in the modules.conf
> > >>
> > >>         so i unload the following modules by
> > >>         noload => chan_mgcp.so
> > >>         noload => chan_skinny.so
> > >>         noload => chan_oss.so
> > >>
> > >>
> > >>         [root at test asterisk]# asterisk -c
> > >>         Asterisk 1.0.9, Copyright (C) 1999-2004 Digium.
> > >>         Written by Mark Spencer <markster at digium.com>
> > >>         =========================================================================
> > >>         [ Booting......................................................................................Illegal instruction
> > >>         [root at test asterisk]#
> > >>
> > >>
> > >>         Then i try to start it
> > >>         [root at test asterisk]# asterisk -rvvvv
> > >>         Unable to connect to remote asterisk
> > >>         [root at test asterisk]#
> > >>
> > >>
> > >>
> > >>         So can you tell me why i am having this problem and how can i
> > >>         solve it
> > >>
> > >>
> > >>
> > >>         Regard
> > >>         Talat
> > >>
> > >>
> > >>
> > >>         _______________________________________________
> > >>         --Bandwidth and Colocation provided by Easynews.com --
> > >>
> > >>         Asterisk-Users mailing list
> > >>         To UNSUBSCRIBE or update options visit:
> > >>            http://lists.digium.com/mailman/listinfo/asterisk-users
> > >>
> > >>
> > >>
> > >> --
> > >> regards,
> > >>
> > >> Mark P. Edwards
> > >> FWD: 667917
> > >
> > > _______________________________________________
> > > --Bandwidth and Colocation provided by Easynews.com --
> > >
> > > Asterisk-Users mailing list
> > > To UNSUBSCRIBE or update options visit:
> > >   http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>