[Asterisk-Users] [helpp] Problem in astersik

[Kiss Karoly]

Hello,

This looks like the asterisk you are using was compiled for a higher class 
CPU then the one running it.

Regards
Kiss Karoly

On Mon, 12 Dec 2005, Talat Ishtiaq wrote:

> Date: Mon, 12 Dec 2005 15:48:11 +0500
> From: Talat Ishtiaq <talat at thespinnakers.com>
> To: Mark Edwards <mark.p.edwards at gmail.com>
> Cc: Asterisk Users Mailing List - Non-Commercial Discussion
>     <asterisk-users at lists.digium.com>
> Subject: Re: [Asterisk-Users] [helpp] Problem in astersik
> 
> Hi Mark
>
>
> The
>
> #/usr/sbin/astersik -vc
> -------------------(many verbosity)
> Illegal instruction
> [root at test postfix]# /usr/sbin/asterisk
> [root at test postfix]# /usr/sbin/asterisk -rvvvv
> Unable to connect to remote asterisk
>
> still give me illegal instruction in the end.
>
>
> As long as i remember i did not get any error during make and make
> install command.
> What packages do you want me to update on my fedora core 3 machine
> Plz tell me
>
>
> Regard
> Talat
>
>
>
>
>
>
>
>
>
>
>
>
> On Mon, 2005-12-12 at 21:16 +1100, Mark Edwards wrote:
>> Hi.
>>
>> First off, the illegal instruction doesn't look at all pretty.
>>
>> The best way to start a new installation is to start asterisk thus:
>>
>> /usr/sbin/asterisk -vc
>>
>> when you get a clean start with no fatal or significant errors, you
>> can close it out and then start it as a daemon
>>
>> /usr/sbin/asterisk
>>
>> Only then can you use "-r" to connect to the remote console.
>>
>> I would suggest if you are having "illegal instruction' messages, then
>> asterisk isn't starting cleanly, and you have a significant
>> compilation issue on your hands.
>>
>> I would make sure your FC3 box is up2date and that you are not seeing
>> any significant compilation errors first.
>>
>> Once you have got things going this far, we can then look at your
>> dialplan...
>>
>> cheers,
>>
>> Mark
>>
>> On 12/12/05, Talat Ishtiaq <talat at thespinnakers.com> wrote:
>>         Hi I am very new to asterisk
>>
>>         I am facing some problems
>>         I have installed asterisk on my fedora core 3 by tar.gz
>>         by
>>         #cd /usr/local
>>         #tar -xzvf asterisk----.tar.gz
>>         #make
>>         #make install
>>         #make samples
>>         i made following changes in the sip.conf and extention.conf
>>         In sip.conf
>>         [500]
>>         context=fromsip
>>         type=friend
>>         username=500
>>         secret=shanee
>>         callerid="shanee" <500>
>>         host=dynamic
>>         nat=yes
>>         canreinvite=no
>>         disallow=all
>>         allow=ulaw
>>         dtmfmode=info
>>         callgroup=3
>>         pickupgroup=3
>>         qualify=1000
>>
>>
>>         [501]
>>         context=fromsip
>>         type=friend
>>         username=501
>>         secret=shanee
>>         callerid="shanee" <501>
>>         host=dynamic
>>         nat=yes
>>         canreinvite=no
>>         disallow=all
>>         allow=ulaw
>>         dtmfmode=info
>>         callgroup=3
>>         pickupgroup=3
>>         qualify=1000
>>
>>         In externsion.conf
>>         [fromsip]
>>         exten => s,1,Answer( )
>>         exten => _5XX,1,Dial(SIP/${EXTEN},100,tr)
>>         exten => h,1,Hangup
>>         exten => t,1,Hangup
>>         exten => i,1,Hangup
>>
>>         Then What i did is
>>         [root at test asterisk]# asterisk -rvvv
>>         Unable to connect to remote asterisk
>>         [root at test asterisk]# asterisk -c
>>         Asterisk 1.0.9, Copyright (C) 1999-2004 Digium.
>>         Written by Mark Spencer <markster at digium.com>
>>         =========================================================================
>>         [ Booting...................................................Dec 10
>>         07:09:47 WARNING[865]: chan_oss.c:257 sound_thread: Read error
>>         on sound
>>         device: Resource temporarily unavailable
>>         ...........Dec 10 07:09:47 WARNING[865]: chan_mgcp.c:4050
>>         reload_config:
>>         Unable to get our IP address, MGCP disabled
>>         ...Dec 10 07:09:47 WARNING[865]: chan_skinny.c:2587
>>         reload_config:
>>         Unable to get our IP address, Skinny disabled
>>         ........................Illegal instruction
>>
>>
>>
>>         I gave these error to forum and i got reply that you should
>>         unload the
>>         mgcp and skinny modules in the modules.conf
>>
>>         so i unload the following modules by
>>         noload => chan_mgcp.so
>>         noload => chan_skinny.so
>>         noload => chan_oss.so
>>
>>
>>         [root at test asterisk]# asterisk -c
>>         Asterisk 1.0.9, Copyright (C) 1999-2004 Digium.
>>         Written by Mark Spencer <markster at digium.com>
>>         =========================================================================
>>         [ Booting......................................................................................Illegal instruction
>>         [root at test asterisk]#
>>
>>
>>         Then i try to start it
>>         [root at test asterisk]# asterisk -rvvvv
>>         Unable to connect to remote asterisk
>>         [root at test asterisk]#
>>
>>
>>
>>         So can you tell me why i am having this problem and how can i
>>         solve it
>>
>>
>>
>>         Regard
>>         Talat
>>
>>
>>
>>         _______________________________________________
>>         --Bandwidth and Colocation provided by Easynews.com --
>>
>>         Asterisk-Users mailing list
>>         To UNSUBSCRIBE or update options visit:
>>            http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
>> --
>> regards,
>>
>> Mark P. Edwards
>> FWD: 667917
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>