[Asterisk-Users] [helpp] Problem in astersik

Mark Edwards mark.p.edwards at gmail.com
Mon Dec 12 03:16:01 MST 2005


Hi.

First off, the illegal instruction doesn't look at all pretty.

The best way to start a new installation is to start asterisk thus:

/usr/sbin/asterisk -vc

when you get a clean start with no fatal or significant errors, you can
close it out and then start it as a daemon

/usr/sbin/asterisk

Only then can you use "-r" to connect to the remote console.

I would suggest if you are having "illegal instruction' messages, then
asterisk isn't starting cleanly, and you have a significant compilation
issue on your hands.

I would make sure your FC3 box is up2date and that you are not seeing any
significant compilation errors first.

Once you have got things going this far, we can then look at your
dialplan...

cheers,

Mark

On 12/12/05, Talat Ishtiaq <talat at thespinnakers.com> wrote:
>
> Hi I am very new to asterisk
>
> I am facing some problems
> I have installed asterisk on my fedora core 3 by tar.gz
> by
> #cd /usr/local
> #tar -xzvf asterisk----.tar.gz
> #make
> #make install
> #make samples
> i made following changes in the sip.conf and extention.conf
> In sip.conf
> [500]
> context=fromsip
> type=friend
> username=500
> secret=shanee
> callerid="shanee" <500>
> host=dynamic
> nat=yes
> canreinvite=no
> disallow=all
> allow=ulaw
> dtmfmode=info
> callgroup=3
> pickupgroup=3
> qualify=1000
>
>
> [501]
> context=fromsip
> type=friend
> username=501
> secret=shanee
> callerid="shanee" <501>
> host=dynamic
> nat=yes
> canreinvite=no
> disallow=all
> allow=ulaw
> dtmfmode=info
> callgroup=3
> pickupgroup=3
> qualify=1000
>
> In externsion.conf
> [fromsip]
> exten => s,1,Answer( )
> exten => _5XX,1,Dial(SIP/${EXTEN},100,tr)
> exten => h,1,Hangup
> exten => t,1,Hangup
> exten => i,1,Hangup
>
> Then What i did is
> [root at test asterisk]# asterisk -rvvv
> Unable to connect to remote asterisk
> [root at test asterisk]# asterisk -c
> Asterisk 1.0.9, Copyright (C) 1999-2004 Digium.
> Written by Mark Spencer <markster at digium.com>
> =========================================================================
> [ Booting...................................................Dec 10
> 07:09:47 WARNING[865]: chan_oss.c:257 sound_thread: Read error on sound
> device: Resource temporarily unavailable
> ...........Dec 10 07:09:47 WARNING[865]: chan_mgcp.c:4050 reload_config:
> Unable to get our IP address, MGCP disabled
> ...Dec 10 07:09:47 WARNING[865]: chan_skinny.c:2587 reload_config:
> Unable to get our IP address, Skinny disabled
> ........................Illegal instruction
>
>
>
> I gave these error to forum and i got reply that you should unload the
> mgcp and skinny modules in the modules.conf
>
> so i unload the following modules by
> noload => chan_mgcp.so
> noload => chan_skinny.so
> noload => chan_oss.so
>
>
> [root at test asterisk]# asterisk -c
> Asterisk 1.0.9, Copyright (C) 1999-2004 Digium.
> Written by Mark Spencer <markster at digium.com>
> =========================================================================
> [
> Booting......................................................................................Illegal
> instruction
> [root at test asterisk]#
>
>
> Then i try to start it
> [root at test asterisk]# asterisk -rvvvv
> Unable to connect to remote asterisk
> [root at test asterisk]#
>
>
>
> So can you tell me why i am having this problem and how can i solve it
>
>
>
> Regard
> Talat
>
>
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com --
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>



--
regards,

Mark P. Edwards
FWD: 667917
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051212/70ec3390/attachment.htm


More information about the asterisk-users mailing list