[Asterisk-Users] Problems with zaptel channels not properly beinganswered...

[Steve Totaro]

> 
> I have a TDM400P card with 2 incoming analog lines on it. I have a
> working dialplan for 2 IAX lines that work perfectly. I want these 2
> analog lines to also utilize my dialplan for both incoming and
> outgoing. However, as my config stands right now, any incoming calls
> from the analog lines aren't working perfectly yet.
> 
> First, the analog calls are seen by Asterisk and Asterisk looks like
> it's picking the call up and the dialplan executes. I can see this
> all happening if I run "sudo asterisk -vvvv" from a command line and
> watch the console print out messages. However, from the analog
> caller's side, it sounds like Asterisk never picked up as you always
> hear ringing and that's all. I will place my /etc/zaptel.conf and /
> etc/asterisk/zapata.conf files inline with this message. Any
> suggestions are greatly appreciated.
> 
> Thanks,
> 
> Jim Hodapp
> 
> ---------------- /etc/zaptel.conf -----------------
> loadzone=us
> defaultzone=us
> fxoks=1-2
> fxsks=3-4
> -------------------------------------------------------
> 
> 
> ---------------- /etc/asterisk/zapata.conf -----------------
> [trunkgroups]
> 
> [channels]
> 
> language=en
> context=default
> busydeteect=yes
> busycount=6
> echotraining=800
> echocancel=yes
> immediate=no
> usecallerid=yes
> callwaiting=yes
> hidecallerid=no
> threewaycalling=yes
> transfer=yes
> 
> ;;;;;;;[400]
> signalling=fxo_ks
> mailbox=400 at default
> echotraining=800
> echocancelwhenbridge=no
> echocancel=yes
> context=longdistance
> callprogress=no
> callerid="Bowen & Fenwick"<400>
> busydetect=no
> busycount=7
> channel => 1
> 
> ;;;;;;;;[401]
> signalling=fxo_ks
> mailbox=401 at default
> echotraining=800
> echocancelwhenbridge=no
> echocancel=yes
> context=longdistance
> callprogress=no
> callerid="Conference Room #1<401>
> busydetect=no
> busycount=7
> channel => 2
> 
> group=1
> signalling=fxo_ks       ; Drive a handset or other station device.
> context=default
> channel => 1-2
> 
> group=2
> signalling=fxs_ks       ; Signals the phone company.
> context=longdistance
> channel => 3-4


Please post the output from your console.  Set debug on and verbose 60
or something.

Thanks,
Steve