[Asterisk-Users] Nortel Meridian Option81C to TE405P

Schochet, Wes wes.schochet at selectcomfort.com
Thu Dec 8 15:51:36 MST 2005 

Joe, are you running PRI to your Opt 11?  I have a 61 and I can;t get my
d-channel to come up to save my life!

  _____  

From: Joe Pukepail [mailto:pukepail at gmail.com] 
Sent: Thursday, December 08, 2005 9:21 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] Nortel Meridian Option81C to TE405P


You can't use a ethernet crossover cable, make sure you are using a T1
crossover cable.  (you will definately need to use a T1 crossover cable). 
 
I'm running a Nortel Option 11 and Asterisk connected in this manner. 

 
On 12/8/05, Steve Totaro <stotaro at totarotechnologies.com
<mailto:stotaro at totarotechnologies.com> > wrote: 


He said that he is using a crossover but for some reason I think the
crossover may be the problem.  Try making a new one.  Cross pin one with 
four and two with five.  Also try a straight through cable.  Your
configs look fine on the asterisk side although I am not real cluefull
on the Meridian.

One question, was the Meridian ever hooked up to the PSTN? 

Thanks,
Steve

>
> This might be an obvious question, but should you be using a crossover
> cable?
>
> Information on setting up Nortel to TDM card links can be found at:
> < http://www.pham.org/asterisk/asterisk-meridian-a1.pdf
<http://www.pham.org/asterisk/asterisk-meridian-a1.pdf> >
>
> Regards,
> --
> Anthony Rodgers
> Business Systems Analyst
> District of North Vancouver
> Web: http://www.dnv.org <http://www.dnv.org> 
> RSS Feed: http://www.dnv.org/rss.asp <http://www.dnv.org/rss.asp> 
>
>
> On Dec 6, 2005, at 2:59 PM, Anish Basu wrote: 
>
> > Hi,
> >
> > I am having problems connecting a Nortel Meridian Option 81C PBX to
my
> > Asterisk 1.20 server. We are using the TE405P card with one
crossover
> > PRI 
> > T1 cable connecting the two systems. The lights on the back of the
> > TE405P
> > are green and zttool shows that the span is okay. Calls cannot be
> > made and
> > 'pri show span 1' shows the d-channel as down. If anyone has any 
> > experience
> > with this, suggestions and tips are greatly appreciatd. If we
cannot
> > get
> > this resolved within the next few days, we are willing to pay
> > consulting 
> > fees for help. The config files are as listed below. Thanks for
any
> > help
> > in advance.
> >
> >
> > zaptel.conf
> > -----------
> > loadzone = us 
> > defaultzone=us
> > span=1,0,0,esf,b8zs
> > bchan=1-23
> > dchan=24
> >
> > zapata.conf
> > -----------
> > [trunkgroups]
> >
> > [channels] 
> > language=en
> > switchtype=5ess
> > context=from-pbx
> > signalling=pri_net
> > group=1
> > callgroup=1
> > pickupgroup=1
> > channel => 1-23 
> > usecallerid=yes
> > hidecallerid=no
> > callwaiting=yes
> > callwaitingcallerid=yes
> > threewaycalling=yes
> > transfer=yes
> > canpark=yes
> > cancallforward=yes 
> > callreturn=yes
> > echocancel=yes
> > echocancelwhenbridged=yes
> > rxgain=0.0
> > txgain=0.0
> > faxdetect=both
> > musiconhold=default
> >
> > Nortel configuration: b-channel,d-channel, and route data block
> > ---------------------------------------------------------------
> > REQ prt
> > TYPE adan dch 10
> >
> > ADAN DCH 10 
> > CTYP MSDL
> > GRP 3
> > DNUM 2
> > PORT 0
> > DES VresaBridge
> > USR PRI
> > DCHL 101
> > OTBF 32
> > PARM RS422 DTE
> > DRAT 64KC 
> > CLOK EXT
> > IFC ESS5
> > SIDE USR
> > CNEG 1
> > RLS ID 1
> > RCAP ND2
> > MBGA NO
> > OVLR NO
> > OVLS NO
> > T200 3
> > T203 10 
> > N200 3
> > N201 260
> > K 7
> >
> >
> > ROUT 1
> >
> > TYPE RDB
> > CUST 00
> > ROUT 1
> > DES VERSA
> > TKTP TIE 
> > NPID_TBL_NUM 0
> > ESN NO
> > CNVT NO
> > SAT NO
> > RCLS EXT
> > VTRK NO
> > DTRK YES
> > BRIP NO
> > DGTP PRI
> > ISDN YES
> > MODE PRA
> > IFC ESS5
> > SBN NO
> > PNI 00001
> > SRVC NNSF
> > NCNA YES
> > NCRD YES
> > CHTY BCH
> > CTYP UKWN
> > INAC YES
> > ISAR NO
> > CPUB OFF
> > DAPC NO
> > BCOT 0
> > DSEL VOD
> > PTYP PRI
> > AUTO NO
> > DNIS NO
> > DCDR NO
> > ICOG IAO
> > SRCH LIN 
> > TRMB YES
> > STEP
> > ACOD 8901
> > TCPP NO
> > PII NO
> > TARG 01
> > CLEN 1
> > BILN NO
> > OABS
> > INST
> > IDC NO 
> > DCNO 0 *
> > NDNO 0
> > DEXT NO
> > ANTK
> > SIGO STD
> > ICIS YES
> > TIMR ICF 512
> > OGF 512
> > EOD 13952
> > NRD 10112
> > DDL 70
> > ODT 4096
> > RGV 640
> > GRD 896
> > SFB 3
> > NBS 2048
> >
> >
> > PAGE 002
> >
> > NBL 4096
> >
> > IENB 5
> > TFD 0
> > VSS 0
> > VGD 6
> > DRNG NO
> > CDR NO
> > VRAT NO
> > MUS NO
> > RACD NO
> > FRL 0 0
> > FRL 1 0
> > FRL 2 0
> > FRL 3 0
> > FRL 4 0
> > FRL 5 0
> > FRL 6 0
> > FRL 7 0
> > OHQ NO
> > OHQT 00
> > CBQ NO
> > AUTH NO
> > TDET NO 
> > TTBL 0
> > ATAN NO
> > PLEV 2
> > ALRM NO
> > ART 0
> > SGRP 0
> > AACR NO
> >
> > DES VERSA
> > TN 101 01
> > TYPE TIE 
> > CDEN SD
> > CUST 0
> > TRK PRI
> > PDCA 1
> > PCML MU
> > NCOS 0
> > RTMB 1 73
> > B-CHANNEL SIGNALING
> > TGAR 1
> > AST NO
> > IAPG 0
> > CLS UNR DTN WTA LPR APN THFD HKD
> > P10 VNL
> > TKID
> > DATE 5 DEC 2005
> >
> >
> >
> > Anish Basu
> > Field Systems Engineer 
> > Softel, Inc.
> > Phone: (732) 705-9202
> > Cell: (732) 312-6634
> >
> > _______________________________________________
> > --Bandwidth and Colocation provided by Easynews.com
<http://Easynews.com>  --
> >
> > Asterisk-Users mailing list
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
<http://lists.digium.com/mailman/listinfo/asterisk-users> 
>
> _______________________________________________
> --Bandwidth and Colocation provided by Easynews.com <http://Easynews.com>
--
>
> Asterisk-Users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
<http://lists.digium.com/mailman/listinfo/asterisk-users> 
_______________________________________________
--Bandwidth and Colocation provided by Easynews.com <http://Easynews.com>
--

Asterisk-Users mailing list
To UNSUBSCRIBE or update options visit: 
  http://lists.digium.com/mailman/listinfo/asterisk-users
<http://lists.digium.com/mailman/listinfo/asterisk-users> 



-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20051208/0f79b811/attachment.htm

More information about the asterisk-users mailing list