[Asterisk-Users] uip200 phone not work with 1.2

[Jason Becker]

Jerry Geis wrote:
> I have a handful of phones that work with 1.0.9. I was trying to upgrade 
> to 1.2
> and the UIP200 phones dont ring.
> 
> below is my config for 1 phone.
> 
> I tried it with and without the qualify=yes or qualify=no and did not 
> seem to make
> a difference. still no ring.
> 
> Any ideas on what might be the issue?
> 
> THanks,
> 
> Jerry
> --------
> 
> ; Jerry Phone
> [528]
> type=friend
> dtmfmode=rfc2833                ; Choices are inband, rfc2833, or info
> username=something
> secret=something
> disallow=all
> allow=ulaw
> allow=alaw
> host=dynamic
> context=smvoice-sip
> callerid="Jerry" <528>

Need to have:

nat=never (or nat=route)

Regards,

-- 
Jason Becker
Director & CEO
Coalescent Systems Inc.
Enabling Open Source Telephony
403.244.8089
www.coalescentsystems.ca