[Asterisk-Users] Getting started with Asterisk and Aastra 9133i

[Dave Cotton]

On Mon, 2005-12-05 at 11:27 -0500, Robert La Ferla wrote:
> Pete Barnwell wrote:
> > I wasted a lot of time getting 9112is to work with almost identical
> > setup. The problem I eventually found was that the 9112is look for the
> > config file mymacaddress.cfg in upper case (eg 00085D035BC1.cfg) whereas
> > the documentation says they look for lower case, so they were ignoring
> > my tftp settings. The 9133i may well be the same.
> >
> > The other thing I had to do was to provide the line
> >
> >         next-server <tftpserver ip>;
> >
> > in dhcpd.conf to get them to pick everything up. (IIRC that last bit was
> > only to do with time&date format though).
> >   
> 
> I read about the mac address case sensitivity so I used an all uppercase 
> filename which works fine. The downloading of the firmware works fine 
> too.  I also have the ntp time/date working.  I just can't get Asterisk 
> to respond to the phone!  Help!

One thing is to do a factory reset to reinit everything, I did that with
my 9112i after upgrading the firmware.

 
-- 
Dave Cotton <dcotton at linuxautrement.com>