[Asterisk-Users] bristuff-0.2.0-rc8f-cvs does not work with TDM400P

[Alex Ongena]

Hi,

A note for people spending hours to get ISDN equipment work together
with Digium TDM equipment....

I have 1 OctoBri and 1 TDM40B and tried bristuff-0.2.0-rc8f-cvs.

modprobe qozap works well, but modprobe wctdm does not find a board.
(while wctdm works fine with zaptel-cvs-head)

So, I just copied .../zaptel-cvs-head/wctdm.c
to .../bristuff-0.2.0-RC8f-CVS/zaptel, did make linux26, make install
and modprobe wctdm found my board again.

I now have a working version with both OctaBRI and TDM40B.

Fyi, my /etc/zaptel.conf


loadzone=nl
defaultzone=nl

# octaBRI
span=1,1,3,ccs,ami
bchan=1-2
dchan=3
span=2,1,3,ccs,ami
bchan=4-5
dchan=6
span=3,1,3,ccs,ami
bchan=7-8
dchan=9
span=4,1,3,ccs,ami
bchan=10-11
dchan= 12

# TDM40B
fxoks=13-16


Commands:

# modprobe qozap
# modprobe wctdm

# ls -l /proc/zaptel
total 0
-r--r--r--  1 root root 0 2005-08-18 12:30 1
-r--r--r--  1 root root 0 2005-08-18 12:30 2
-r--r--r--  1 root root 0 2005-08-18 12:30 3
-r--r--r--  1 root root 0 2005-08-18 12:30 4
-r--r--r--  1 root root 0 2005-08-18 12:30 5

# cat /proc/zaptel/*
Span 1: ztqoz/2/1 "quadBRI PCI ISDN Card 1 Span 1 [NT] (cardID 0) Layer
1 DEACTIVATED (G2)"

           1 ztqoz2/1/1 Clear
           2 ztqoz2/1/2 Clear
           3 ztqoz2/1/3 HDLCFCS
Span 2: ztqoz/2/2 "quadBRI PCI ISDN Card 1 Span 2 [NT] (cardID 0) Layer
1 DEACTIVATED (G2)"

           4 ztqoz2/2/1 Clear
           5 ztqoz2/2/2 Clear
           6 ztqoz2/2/3 HDLCFCS
Span 3: ztqoz/2/3 "quadBRI PCI ISDN Card 1 Span 3 [TE] (cardID 0) Layer
1 DEACTIVATED (F3)"

           7 ztqoz2/3/1 Clear
           8 ztqoz2/3/2 Clear
           9 ztqoz2/3/3 HDLCFCS
Span 4: ztqoz/2/4 "quadBRI PCI ISDN Card 1 Span 4 [TE] (cardID 0) Layer
1 DEACTIVATED (F3)"

          10 ztqoz2/4/1 Clear
          11 ztqoz2/4/2 Clear
          12 ztqoz2/4/3 HDLCFCS
Span 5: WCTDM/0 "Wildcard TDM400P REV I Board 1"

          13 WCTDM/0/0 FXOKS
          14 WCTDM/0/1 FXOKS
          15 WCTDM/0/2 FXOKS
          16 WCTDM/0/3 FXOKS


Are there people with a similar configuration who want to share their
experiences ? (for example, what drivers they prefer for which reason)


Regards
Alex

--
NEW: aXs GUARD hands-on Trainings v.7.0 
more info at http://www.axsguard.com/indextraining.htm

aXs GUARD has completed security and anti-virus checks on this e-mail
(http://www.axsguard.com)
---------------------------------------------------
Able NV: ond.nr 0457.938.087