[Asterisk-Users] ISDN DID
Johann Steinwendtner
johann.steinwendtner at utanet.at
Wed Aug 10 02:25:24 MST 2005
There is no called party ie but sending complete ie included in the
setup message. Hence, it tries to terminate.
Best regards
Hans
Paul Belanger schrieb:
> Where are your calls coming from? Are you connected to the Telco or PBX?
>
> PB
>
> Panitaxx wrote:
>
>> Hi,
>>
>> thanks for your response. here is the log of one call:
>>
>> Enabled debugging on span 1
>>
>> Asterisk*CLI>
>> < Protocol Discriminator: Q.931 (8) len=33
>> < Call Ref: len= 2 (reference 72/0x48) (Originator)
>> < Message type: SETUP (5)
>> < [a1]
>> < Sending Complete (len= 1)
>> < [04 03 90 90 a3]
>> < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
>> capability: 3.1kHz audio (16)
>> < Ext: 1 Trans mode/rate: 64kbps,
>> circuit-mode (16)
>> < Ext: 1 User information layer 1: A-Law
>> (35)
>> < [18 03 a9 83 8d]
>> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0,
>> Exclusive Dchan: 0
>> < ChanSel: Reserved
>> < Ext: 1 Coding: 0 Number Specified Channel
>> Type: 3
>> < Ext: 1 Channel: 13 ]
>> < [1e 02 84 83]
>> < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
>> (0) 0: 0 Location: Public network serving the remote user (4)
>> < Ext: 1 Progress Description: Calling
>> equipment is non-ISDN. (3) ]
>> < [6c 0b 00 83 39 31 35 34 35 31 39 30 30]
>> < Calling Number (len=13) [ Ext: 0 TON: Unknown Number Type (0) NPI:
>> Unknown Number Plan (0)
>> < Presentation: Presentation allowed of
>> network provided number (3) '915451900' ]
>> -- Making new call for cr 72
>> -- Processing Q.931 Call Setup
>> -- Processing IE 161 (cs0, Sending Complete)
>> -- Processing IE 4 (cs0, Bearer Capability)
>> -- Processing IE 24 (cs0, Channel Identification)
>> -- Processing IE 30 (cs0, Progress Indicator)
>> -- Processing IE 108 (cs0, C
>> alling Party Number)
>> -- Going to extension s|1 because of Complete received
>>
>>
>>> Protocol Discriminator: Q.931 (8) len=10
>>> Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
>>> Message type: CALL PROCEEDING (2)
>>> [18 03 a9 83 8d]
>>> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0,
>>> Exclusive Dchan: 0
>>> ChanSel: Reserved
>>> Ext: 1 Coding: 0 Number Specified Channel
>>> Type: 3
>>> Ext: 1 Channel: 13 ]
>>
>>
>> -- Accepting call from '915451900' to 's' on channel 0/13, span 1
>>
>> Asterisk*CLI> -- Executing Playback("Zap/13-1",
>> "vm-intro|noanswer") in new stack
>>
>>
>>> Protocol Discriminator: Q.931 (8) len=9
>>> Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
>>> Message type: PROGRESS (3)
>>> [1e 02 81 88]
>>> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
>>> (0) 0: 0 Location: Private network serving the local user (1)
>>> Ext: 1 Progress Description: Inband
>>> information or appropriate pattern now available. (8) ]
>>
>>
>> -- Playing 'vm-intro' (language 'es')
>>
>> Asterisk*CLI> -- Executing Playback("Zap/13-1", "vm-goodbye") in
>> new stack
>>
>>
>>> Protocol Discriminator: Q.931 (8) len=14
>>> Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
>>> Message type: CONNECT (7)
>>> [18 03 a9 83 8d]
>>> Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0,
>>> Exclusive Dchan: 0
>>> ChanSel: Reserved
>>> Ext: 1 Coding: 0 Number Specified Channel
>>> Type: 3
>>> Ext: 1 Channel: 13 ]
>>> [1e 02 81 82]
>>> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
>>> (0) 0: 0 Location: Private network serving the local user (1)
>>> Ext: 1 Progress Description: Called
>>> equipment is non-ISDN. (2) ]
>>
>>
>> -- Playing 'vm-goodbye' (language 'es')
>>
>> Asterisk*CLI>
>> < Protocol Discriminator: Q.931 (8) len=5
>> < Call Ref: len= 2 (reference 72/0x48) (Originator)
>> < Message type: CONNECT ACKNOWLEDGE (15)
>> -- Executing NoOp("Zap/13-1", "") in new stack
>> -- Executing Hangup("Zap/13-1", "") in new stack
>> == Spawn extension (primario, s, 4) exited non-zero on 'Zap/13-1'
>>
>> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Active
>>
>>> Protocol Discriminator: Q.931 (8) len=9
>>> Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
>>> Message type: DISCONNECT (69)
>>> [08 02 81 90]
>>> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0
>>> Location: Private network serving the local user (1)
>>> Ext: 1 Cause: Normal Clearing (16), class = Normal
>>> Event (1) ]
>>
>>
>> -- Hungup 'Zap/13-1'
>>
>> Asterisk*CLI>
>> On 8/9/05, jj <jjones at quiddesign.com> wrote:
>>
>>> What does pri debug span 1 show?
>>>
>>> On Aug 9, 2005, at 5:02 PM, Panitaxx wrote:
>>>
>>>
>>>> Hello,
>>>>
>>>> I have an ISDN PRI E1. For some reason I am not receiving the did
>>>> number so every call can only go to s exten. I have tried using _X.
>>>> exten. Also I have immediate=no in zapata.conf. Any hint?
>>>>
>>>> thanks in advance,
>>>>
>>>> Iván Aponte
>>>> _______________________________________________
>>>> Asterisk-Users mailing list
>>>> Asterisk-Users at lists.digium.com
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>> To UNSUBSCRIBE or update options visit:
>>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>>
>>>
>>> _______________________________________________
>>> Asterisk-Users mailing list
>>> Asterisk-Users at lists.digium.com
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>> To UNSUBSCRIBE or update options visit:
>>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>> _______________________________________________
>> Asterisk-Users mailing list
>> Asterisk-Users at lists.digium.com
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>>
>>
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
>
More information about the asterisk-users
mailing list