[Asterisk-Users] ISDN DID
Klaus-Peter Junghanns
kpj at junghanns.net
Wed Aug 10 01:04:55 MST 2005
Hi,
this SETUP message does not contain a CalledParty IE. That means your
telco does not send you the DID. You will probably get ripped off extra
for that feature by your telco.
best regards
Klaus
--
Klaus-Peter Junghanns
On Tue, 2005-08-09 at 17:20 -0500, Panitaxx wrote:
> Hi,
>
> thanks for your response. here is the log of one call:
>
> Enabled debugging on span 1
>
> Asterisk*CLI>
>
> < Protocol Discriminator: Q.931 (8) len=33
> < Call Ref: len= 2 (reference 72/0x48) (Originator)
> < Message type: SETUP (5)
> < [a1]
> < Sending Complete (len= 1)
> < [04 03 90 90 a3]
> < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: 3.1kHz audio (16)
> < Ext: 1 Trans mode/rate: 64kbps,
> circuit-mode (16)
> < Ext: 1 User information layer 1: A-Law (35)
> < [18 03 a9 83 8d]
> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0,
> Exclusive Dchan: 0
> < ChanSel: Reserved
> < Ext: 1 Coding: 0 Number Specified Channel Type: 3
> < Ext: 1 Channel: 13 ]
> < [1e 02 84 83]
> < Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
> (0) 0: 0 Location: Public network serving the remote user (4)
> < Ext: 1 Progress Description: Calling
> equipment is non-ISDN. (3) ]
> < [6c 0b 00 83 39 31 35 34 35 31 39 30 30]
> < Calling Number (len=13) [ Ext: 0 TON: Unknown Number Type (0) NPI:
> Unknown Number Plan (0)
> < Presentation: Presentation allowed of
> network provided number (3) '915451900' ]
> -- Making new call for cr 72
> -- Processing Q.931 Call Setup
> -- Processing IE 161 (cs0, Sending Complete)
> -- Processing IE 4 (cs0, Bearer Capability)
> -- Processing IE 24 (cs0, Channel Identification)
> -- Processing IE 30 (cs0, Progress Indicator)
> -- Processing IE 108 (cs0, C
> alling Party Number)
> -- Going to extension s|1 because of Complete received
>
> > Protocol Discriminator: Q.931 (8) len=10
> > Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
> > Message type: CALL PROCEEDING (2)
> > [18 03 a9 83 8d]
> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> > ChanSel: Reserved
> > Ext: 1 Coding: 0 Number Specified Channel Type: 3
> > Ext: 1 Channel: 13 ]
> -- Accepting call from '915451900' to 's' on channel 0/13, span 1
>
> Asterisk*CLI>
> -- Executing Playback("Zap/13-1", "vm-intro|noanswer") in new stack
>
> > Protocol Discriminator: Q.931 (8) len=9
> > Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
> > Message type: PROGRESS (3)
> > [1e 02 81 88]
> > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> > Ext: 1 Progress Description: Inband information or appropriate pattern now available. (8) ]
> -- Playing 'vm-intro' (language 'es')
>
> Asterisk*CLI>
> -- Executing Playback("Zap/13-1", "vm-goodbye") in new stack
>
> > Protocol Discriminator: Q.931 (8) len=14
> > Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
> > Message type: CONNECT (7)
> > [18 03 a9 83 8d]
> > Channel ID (len= 5) [ Ext: 1 IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
> > ChanSel: Reserved
> > Ext: 1 Coding: 0 Number Specified Channel Type: 3
> > Ext: 1 Channel: 13 ]
> > [1e 02 81 82]
> > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> > Ext: 1 Progress Description: Called equipment is non-ISDN. (2) ]
> -- Playing 'vm-goodbye' (language 'es')
>
> Asterisk*CLI>
>
> < Protocol Discriminator: Q.931 (8) len=5
> < Call Ref: len= 2 (reference 72/0x48) (Originator)
> < Message type: CONNECT ACKNOWLEDGE (15)
> -- Executing NoOp("Zap/13-1", "") in new stack
> -- Executing Hangup("Zap/13-1", "") in new stack
> == Spawn extension (primario, s, 4) exited non-zero on 'Zap/13-1'
>
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Active
> > Protocol Discriminator: Q.931 (8) len=9
> > Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
> > Message type: DISCONNECT (69)
> > [08 02 81 90]
> > Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location: Private network serving the local user (1)
> > Ext: 1 Cause: Normal Clearing (16), class = Normal Event (1) ]
> -- Hungup 'Zap/13-1'
>
> Asterisk*CLI>
>
> On 8/9/05, jj <jjones at quiddesign.com> wrote:
> > What does pri debug span 1 show?
> >
> > On Aug 9, 2005, at 5:02 PM, Panitaxx wrote:
> >
> > > Hello,
> > >
> > > I have an ISDN PRI E1. For some reason I am not receiving the did
> > > number so every call can only go to s exten. I have tried using _X.
> > > exten. Also I have immediate=no in zapata.conf. Any hint?
> > >
> > > thanks in advance,
> > >
> > > Iván Aponte
> > > _______________________________________________
> > > Asterisk-Users mailing list
> > > Asterisk-Users at lists.digium.com
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > > To UNSUBSCRIBE or update options visit:
> > > http://lists.digium.com/mailman/listinfo/asterisk-users
> > >
> >
> > _______________________________________________
> > Asterisk-Users mailing list
> > Asterisk-Users at lists.digium.com
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> > To UNSUBSCRIBE or update options visit:
> > http://lists.digium.com/mailman/listinfo/asterisk-users
> >
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list