[Asterisk-Users] ISDN DID

Tue Aug 9 15:34:39 MST 2005

Where are your calls coming from?  Are you connected to the Telco or PBX?

PB

Panitaxx wrote:
> Hi,
> 
> thanks for your response. here is the log of one call:
> 
> Enabled debugging on span 1
> 
> Asterisk*CLI> 
> 
> < Protocol Discriminator: Q.931 (8)  len=33
> < Call Ref: len= 2 (reference 72/0x48) (Originator)
> < Message type: SETUP (5)
> < [a1]
> < Sending Complete (len= 1)
> < [04 03 90 90 a3]
> < Bearer Capability (len= 5) [ Ext: 1  Q.931 Std: 0  Info transfer
> capability: 3.1kHz audio (16)
> <                              Ext: 1  Trans mode/rate: 64kbps,
> circuit-mode (16)
> <                              Ext: 1  User information layer 1: A-Law (35)
> < [18 03 a9 83 8d]
> < Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0,
> Exclusive Dchan: 0
> <                        ChanSel: Reserved
> <                       Ext: 1  Coding: 0   Number Specified   Channel Type: 3
> <                       Ext: 1  Channel: 13 ]
> < [1e 02 84 83]
> < Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard
> (0) 0: 0   Location: Public network serving the remote user (4)
> <                               Ext: 1  Progress Description: Calling
> equipment is non-ISDN. (3) ]
> < [6c 0b 00 83 39 31 35 34 35 31 39 30 30]
> < Calling Number (len=13) [ Ext: 0  TON: Unknown Number Type (0)  NPI:
> Unknown Number Plan (0)
> <                           Presentation: Presentation allowed of
> network provided number (3) '915451900' ]
> -- Making new call for cr 72
> -- Processing Q.931 Call Setup
> -- Processing IE 161 (cs0, Sending Complete)
> -- Processing IE 4 (cs0, Bearer Capability)
> -- Processing IE 24 (cs0, Channel Identification)
> -- Processing IE 30 (cs0, Progress Indicator)
> -- Processing IE 108 (cs0, C
> alling Party Number)
>     -- Going to extension s|1 because of Complete received
> 
> 
>>Protocol Discriminator: Q.931 (8)  len=10
>>Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
>>Message type: CALL PROCEEDING (2)
>>[18 03 a9 83 8d]
>>Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
>>                       ChanSel: Reserved
>>                      Ext: 1  Coding: 0   Number Specified   Channel Type: 3
>>                      Ext: 1  Channel: 13 ]
> 
>     -- Accepting call from '915451900' to 's' on channel 0/13, span 1
> 
> Asterisk*CLI> 
>     -- Executing Playback("Zap/13-1", "vm-intro|noanswer") in new stack
> 
> 
>>Protocol Discriminator: Q.931 (8)  len=9
>>Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
>>Message type: PROGRESS (3)
>>[1e 02 81 88]
>>Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Private network serving the local user (1)
>>                              Ext: 1  Progress Description: Inband information or appropriate pattern now available. (8) ]
> 
>     -- Playing 'vm-intro' (language 'es')
> 
> Asterisk*CLI> 
>     -- Executing Playback("Zap/13-1", "vm-goodbye") in new stack
> 
> 
>>Protocol Discriminator: Q.931 (8)  len=14
>>Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
>>Message type: CONNECT (7)
>>[18 03 a9 83 8d]
>>Channel ID (len= 5) [ Ext: 1  IntID: Implicit, PRI Spare: 0, Exclusive Dchan: 0
>>                       ChanSel: Reserved
>>                      Ext: 1  Coding: 0   Number Specified   Channel Type: 3
>>                      Ext: 1  Channel: 13 ]
>>[1e 02 81 82]
>>Progress Indicator (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Private network serving the local user (1)
>>                              Ext: 1  Progress Description: Called equipment is non-ISDN. (2) ]
> 
>     -- Playing 'vm-goodbye' (language 'es')
> 
> Asterisk*CLI> 
> 
> < Protocol Discriminator: Q.931 (8)  len=5
> < Call Ref: len= 2 (reference 72/0x48) (Originator)
> < Message type: CONNECT ACKNOWLEDGE (15)
>     -- Executing NoOp("Zap/13-1", "") in new stack
>     -- Executing Hangup("Zap/13-1", "") in new stack
>   == Spawn extension (primario, s, 4) exited non-zero on 'Zap/13-1'
> 
> NEW_HANGUP DEBUG: Calling q931_hangup, ourstate Active, peerstate Active
> 
>>Protocol Discriminator: Q.931 (8)  len=9
>>Call Ref: len= 2 (reference 32840/0x8048) (Terminator)
>>Message type: DISCONNECT (69)
>>[08 02 81 90]
>>Cause (len= 4) [ Ext: 1  Coding: CCITT (ITU) standard (0) 0: 0   Location: Private network serving the local user (1)
>>                 Ext: 1  Cause: Normal Clearing (16), class = Normal Event (1) ]
> 
>     -- Hungup 'Zap/13-1'
> 
> Asterisk*CLI> 
> 
> On 8/9/05, jj <jjones at quiddesign.com> wrote:
> 
>>What does pri debug span 1 show?
>>
>>On Aug 9, 2005, at 5:02 PM, Panitaxx wrote:
>>
>>
>>>Hello,
>>>
>>>I have an ISDN PRI E1. For some reason I am not receiving the did
>>>number so every call can only go to s exten. I have tried using _X.
>>>exten. Also I have immediate=no in zapata.conf. Any hint?
>>>
>>>thanks in advance,
>>>
>>>Iván Aponte
>>>_______________________________________________
>>>Asterisk-Users mailing list
>>>Asterisk-Users at lists.digium.com
>>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>>To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>_______________________________________________
>>Asterisk-Users mailing list
>>Asterisk-Users at lists.digium.com
>>http://lists.digium.com/mailman/listinfo/asterisk-users
>>To UNSUBSCRIBE or update options visit:
>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
> 
> 
> 