[Asterisk-Users] TE110P flashing red/green when PRI connected

[Fredrik Lithén]

Peter,

Thanks for the reply!

Yes, I tried that but it sent me a bit offtrack as it reported "blue"
which I assumed was a clocksync problem, or at least, that was the info
I could find.

As it turned out, my provider didn't have error correction enabled so
after have endured painstaking task of getting hold of the right
person to talk to :) the problem was swiftly fixed.

Fredrik

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Peter Svensson
Sent: den 8 augusti 2005 16:56
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [Asterisk-Users] TE110P flashing red/green when PRI connected

On Mon, 8 Aug 2005, Fredrik Lithén wrote:

> I'm having difficulties getting up my TE110P (running as a E1) when I 
> connect it to the PRI. If I start the server with a loopback connector 
> everything seems fine and the led is green but when I connect it to 
> the PRI the flashing starts ....

The command "zttool" may tell you what is wrong.

Peter


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users