[Asterisk-Users] X100P with Caller-ID in Australia, anyone?

[Mathew McKernan]

Hi Jon,

Most likely your current card will work in Australia, but you need to
patch the Asterisk Source to support the Australian Caller ID standard.

You need to modify the file in the source tree of Asterisk.

Its located in /usr/src/asterisk/channels/chan_zap.c (obviously replace
the /usr/src to wherever your source tree is)

Modify the line:

#define DEFAULT_CIDRINGS 1

To

#define DEFAULT_CIDRINGS 2

Then recompile asterisk and install it.

That _should_ then do the trick.

Thanks

Mathew



Mathew McKernan | Support Engineer | Digital World Computers | * +61 3
9318 6022 | 


 

This email is intended solely for the use of the addressee and may
contain information that is confidential or subject to legal
professional privilege. If you receive this email in error please
immediately notify the sender and delete the email.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Jon
Whitear
Sent: Monday, 8 August 2005 5:05 PM
To: asterisk-users at lists.digium.com
Subject: [Asterisk-Users] X100P with Caller-ID in Australia, anyone?

Hello list,

I have an X100P clone card, and I've been trying to get it to receive
Telstra Caller-ID without any luck. Hence these two questions:-

1) Will a genuine X100P work?

2) If so, where can I get one in Australia?

Cheers,


Jon

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users