[Asterisk-Users] Config HFC-card in asterisk.(Config the phone and asterisk)

[Martin Kronstad]

Hi!

 

I am trying to get my ISDN phone to work with my asterisk box.

 

Now my asterisk won't start.

 

Current situation:

 

I have a cable from my Billion ISDN (Bipac V1.0) to my old NT1. 

The cable is crossed like this:

1

2

3 -> 4

4 -> 3

5 -> 6

6 -> 5

7

8

 

Then I have a cable from the NT1 to the ISDNphone(not crossed cable). Both
cables are connected in the ISDN ports of the NT1 (no cables in the Line
port of the NT1).

There is no dialtone in my phone, and when I lift the headset off the phone
I get, after a few seconds a message of "No line" in the display.

 

The ISDN card should be correctly set up in NT-mode.

 

Result from [root at asterisk1 root]# ztcfg -vv

 

------------------ START RESULT ----------------------

 

SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)

 

Channel map:

 

Channel 01: Individual Clear channel (Default) (Slaves: 01)

Channel 02: Individual Clear channel (Default) (Slaves: 02)

Channel 03: D-channel (Default) (Slaves: 03)

 

3 channels configured.

 

------------------ END RESULT ----------------------

 

Result from running ztool :  Only one item on the list : OK
HFC-S PCI A ISDN card 0 [NT] layer 1 AC

 

Here are the last lines of my log (disregard the date and time, date and
time on my server is wrong)

 

----------------- START LOG ------------------------

 

Aug 2 04:03:46 VERBOSE[1552]: [chan_phone.so]Aug 2 04:03:46 VERBOSE[1552]:
[chan_phone.so] => (Linux Telephony API Support)
Aug 2 04:03:46 VERBOSE[1552]: == Parsing '/etc/asterisk/phone.conf': Aug 2
04:03:46 VERBOSE[1552]: == Parsing '/etc/asterisk/phone.conf': Found
Aug 2 04:03:46 VERBOSE[1552]: == Registered channel type 'Phone' (Standard
Linux Telephony API Driver)
Aug 2 04:03:46 VERBOSE[1552]: [chan_zap.so]Aug 2 04:03:46 DEBUG[1552]:
Setting NAT on RTP to 0
Aug 2 04:03:46 DEBUG[1552]: Stopping retransmission on
'4054139b6d809de158552f97216c60f0 at 10.0.0.10' of Request 102: Found
Aug 2 04:03:46 VERBOSE[1552]: [chan_zap.so] => (Zapata Telephony w/PRI)
Aug 2 04:03:46 VERBOSE[1552]: == Parsing '/etc/asterisk/zapata.conf': Aug 2
04:03:46 VERBOSE[1552]: == Parsing '/etc/asterisk/zapata.conf': Found
Aug 2 04:03:46 WARNING[1552]: No '=' (equal sign) in line 5 of zapata.conf
Aug 2 04:03:46 VERBOSE[1552]: == Parsing
'/etc/asterisk/zapata_additional.conf': Aug 2 04:03:46 VERBOSE[1552]: ==
Parsing '/etc/asterisk/zapata_additional.conf': Found
Aug 2 04:03:46 VERBOSE[1552]: == Parsing '/etc/asterisk/zapata-auto.conf':
Aug 2 04:03:46 VERBOSE[1552]: == Parsing '/etc/asterisk/zapata-auto.conf':
Found
Aug 2 04:03:46 DEBUG[1552]: Updated conferencing on 1, with 0 conference
users
Aug 2 04:03:46 VERBOSE[1552]: -- Registered channel 1, PRI Signalling
signalling
Aug 2 04:03:46 DEBUG[1552]: Updated conferencing on 2, with 0 conference
users
Aug 2 04:03:46 VERBOSE[1552]: -- Registered channel 2, PRI Signalling
signalling
Aug 2 04:03:46 WARNING[1552]: Ignoring record_out
Aug 2 04:03:46 WARNING[1552]: Ignoring record_in
Aug 2 04:03:46 WARNING[1552]: Ignoring echocancelwhenbridge
Aug 2 04:03:46 ERROR[1552]: Signalling requested is FXO Kewlstart but line
is in PRI Signalling signalling
Aug 2 04:03:46 ERROR[1552]: Unable to register channel '1'
Aug 2 04:03:46 WARNING[1552]: chan_zap.so: load_module failed, returning -1
Aug 2 04:03:46 VERBOSE[1552]: == Unregistered channel type 'Tor'
Aug 2 04:03:46 VERBOSE[1552]: == Unregistered channel type 'Zap'
Aug 2 04:03:46 VERBOSE[1552]: -- Unregistered channel 1
Aug 2 04:03:46 VERBOSE[1552]: -- Unregistered channel 2
Aug 2 04:03:46 WARNING[1552]: Loading module chan_zap.so failed!
Aug 2 04:03:46 WARNING[1552]: Loading module chan_zap.so failed!

 

--------------------- END LOG ----------------------------------

 

Martin Kronstad

 

Siteman DA

www.siteman.no

Tlf:. 32 87 56 10

Mobil: 951 70 230

 

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050802/efa9a23d/attachment.htm