[Asterisk-Users] Polycom IP500 - Phone TIme

[Paul Hales]

And my dream....that one day Polycom phones will support Australian Daylight savings...	 

But it's only a dream.

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Rick Baranowski
Sent: Friday, 29 April 2005 3:03 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: RE: [Asterisk-Users] Polycom IP500 - Phone TIme

We set ours through the web interface on the phone

Here is what we use for Phoenix.

tcpIpApp.sntp.daylightSavings.enable="0" tcpIpApp.sntp.gmtOffset="-25200"
tcpIpApp.sntp.address="207.46.130.100"

Rick

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Dan Morin
Sent: Thursday, April 28, 2005 8:25 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Polycom IP500 - Phone TIme



-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Dan Morin
Sent: Thursday, April 28, 2005 11:17 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Polycom IP500 - Phone TIme

>> Wiley Siler wrote:
>>
>>> Does anyoe know where I can set the timezone in the configuration
files?
>>>
>>> I am in Phoenix, AZ which has a GMT offset of -7 hours but when I
enter
>>> this into the gmt fields in ipmid.cfg nothing seems to happen.
>>>
>>> Here are the fields...
>>>  tcpIpApp.sntp.address="" tcpIpApp.sntp.gmtOffset=""
>>
>>
>> I never set the timezone in the Polycom config file.  I set it in the

>> DHCPd config file.
>>
>> /etc/dhcpd.conf:
>>    option ntp-servers 172.17.2.1;
>>    option time-offset -21600;
>>
>Subquestion to this ( although I much prefer setting the offset in the 
>ipmid.cfg file myself ):  How do you specify a negative offset when you

>are using the dhcp server that comes with windows server?

>Sean

>You need to use the hex value.  Go to
>http://www.cisco.com/warp/public/109/calculate_hexadecimal_dhcp.html
and
>at the bottom of the page there is a chart with the offsets and the hex 
>value.

>Dan

BUT, the hex values on the cisco site have periods in them...don't include those, just the 8 characters.


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users

_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
CAUTION: This email message and accompanying data may contain information that is confidential. If you are not the intended recipient, you are notified that any use, dissemination, distribution or copying of this message or data is prohibited. If you have received this email message in error, please notify us immediately and erase all copies of this message and attachments. Thank you.
CAUTION: This email message and accompanying data may contain information that is confidential. If you are not the intended recipient, you are notified that any use, dissemination, distribution or copying of this message or data is prohibited. If you have received this email message in error, please notify us immediately and erase all copies of this message and attachments. Thank you.