[Asterisk-Users] Polycom IP500 - Phone TIme

[Dan Morin]

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Dan Morin
Sent: Thursday, April 28, 2005 11:17 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: RE: [Asterisk-Users] Polycom IP500 - Phone TIme

>> Wiley Siler wrote:
>>
>>> Does anyoe know where I can set the timezone in the configuration
files?
>>>
>>> I am in Phoenix, AZ which has a GMT offset of -7 hours but when I
enter
>>> this into the gmt fields in ipmid.cfg nothing seems to happen.
>>>
>>> Here are the fields...
>>>  tcpIpApp.sntp.address="" tcpIpApp.sntp.gmtOffset=""
>>
>>
>> I never set the timezone in the Polycom config file.  I set it in the

>> DHCPd config file.
>>
>> /etc/dhcpd.conf:
>>    option ntp-servers 172.17.2.1;
>>    option time-offset -21600;
>>
>Subquestion to this ( although I much prefer setting the offset in the 
>ipmid.cfg file myself ):  How do you specify a negative offset when you

>are using the dhcp server that comes with windows server?

>Sean

>You need to use the hex value.  Go to
>http://www.cisco.com/warp/public/109/calculate_hexadecimal_dhcp.html
and
>at the bottom of the page there is a chart with the offsets and the hex
>value.

>Dan

BUT, the hex values on the cisco site have periods in them...don't
include those, just the 8 characters.


_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users
_______________________________________________
Asterisk-Users mailing list
Asterisk-Users at lists.digium.com
http://lists.digium.com/mailman/listinfo/asterisk-users
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users