[Asterisk-Users] Zaphfc problem
Michał Mosiewicz
mimo at proinet.pl
Sun Apr 24 15:14:32 MST 2005
I upgraded my FC3 to kernel 2.6.11. I installed bristuff 0.2.0-RC8 and I
cannot call out using zaphfc. I can receive calls, but can't get out. Here
is what I got:
-- Starting simple switch on 'Zap/4-1'
-- Executing Dial("Zap/4-1", "Zap/1/******348|60|rTt") in new stack
> [ 00 e7 0e 12 08 01 04 05 04 03 80 90 a3 18 01 81 6c 05 41 80 31 30 31 70
0b c1 30 35 30 31 33 35 39 33 34 38 a1 ]
> Informational frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 115 EA: 1
> N(S): 007 0: 0
> N(R): 009 P: 0
> 33 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8) len=33
> Call Ref: len= 1 (reference 4/0x4) (Originator)
> Message type: SETUP (5)
> [04 03 80 90 a3]
> Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)
> Ext: 1 Trans mode/rate: 64kbps, circuit-mode
(16)
> Ext: 1 User information layer 1: A-Law (35)
> [18 01 81]
> Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, Preferred
Dchan: 0
> ChanSel: B1 channel
]
> [6c 05 41 80 31 30 31]
> Calling Number (len= 7) [ Ext: 0 TON: Subscriber Number (4) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> Presentation: Presentation permitted, user
number not screened (0) '101' ]
> [70 0b c1 *********** 33 34 38]
> Called Number (len=13) [ Ext: 1 TON: Subscriber Number (4) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '******348' ]
> [a1]
> Sending Complete (len= 1)
-- Called 1/******348
< [ 00 e7 01 10 ]
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 115 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 008 P/F: 0
< 0 bytes of data
-- ACKing all packets from 6 to (but not including) 8
-- ACKing packet 7, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter
< [ 02 e7 12 10 08 01 84 02 18 01 89 ]
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 115 EA: 1
< N(S): 009 0: 0
< N(R): 008 P: 0
< 7 bytes of data
-- ACKing all packets from 7 to (but not including) 8
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=7
< Call Ref: len= 1 (reference 132/0x84) (Terminator)
< Message type: CALL PROCEEDING (2)
< [18 01 89]
< Channel ID (len= 3) [ Ext: 1 IntID: Implicit, Other Spare: 0, Exclusive
Dchan: 0
< ChanSel: B1 channel
]
Sending Receiver Ready (10)
> [ 02 e7 01 14 ]
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 115 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 010 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
< [ 02 e7 14 10 08 01 84 45 08 02 82 95 1c 0f 91 a1 0c 02 02 16 c8 06 06 04
00 87 69 01 07 1e 02 82 88 ]
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 115 EA: 1
< N(S): 010 0: 0
< N(R): 008 P: 0
< 29 bytes of data
-- ACKing all packets from 7 to (but not including) 8
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=29
< Call Ref: len= 1 (reference 132/0x84) (Terminator)
< Message type: DISCONNECT (69)
< [08 02 82 95]
< Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Public network serving the local user (2)
< Ext: 1 Cause: Call Rejected (21), class = Normal Event
(1) ]
< [1c 0f 91 a1 0c 02 02 16 c8 06 06 04 00 87 69 01 07]
< Facility (len=17, codeset=0) [ 0x91, 0xa1, 0x0c, 0x02, 0x02, 0x16, 0xc8,
0x06, 0x06, 0x04, 0x00, 0x87, 'i', 0x01, 0x07 ]
< [1e 02 82 88]
< Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0:
0 Location: Public network serving the local user (2)
< Ext: 1 Progress Description: Inband
information or appropriate pattern now available. (8) ]
Sending Receiver Ready (11)
> [ 02 e7 01 16 ]
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 115 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 011 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
-- Channel 0/1, span 1 got hangup
-- Zap/1-1 is circuit-busy
> [ 00 e7 10 16 08 01 04 4d 08 02 81 95 ]
> Informational frame:
> SAPI: 00 C/R: 0 EA: 0
> TEI: 115 EA: 1
> N(S): 008 0: 0
> N(R): 011 P: 0
> 8 bytes of data
-- Restarting T203 counter
Stopping T_203 timer
Starting T_200 timer
> Protocol Discriminator: Q.931 (8) len=8
> Call Ref: len= 1 (reference 4/0x4) (Originator)
> Message type: RELEASE (77)
> [08 02 81 95]
> Cause (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard (0) 0: 0 Location:
Private network serving the local user (1)
> Ext: 1 Cause: Call Rejected (21), class = Normal Event
(1) ]
-- Hungup 'Zap/1-1'
== Everyone is busy/congested at this time
< [ 00 e7 01 12 ]
< Supervisory frame:
< SAPI: 00 C/R: 0 EA: 0
< TEI: 115 EA: 1
< Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
< N(R): 009 P/F: 0
< 0 bytes of data
-- ACKing all packets from 7 to (but not including) 9
-- ACKing packet 8, new txqueue is -1 (-1 means empty)
-- Since there was nothing left, stopping T200 counter
-- Nothing left, starting T203 counter
-- Restarting T203 counter
< [ 02 e7 16 12 08 01 84 5a ]
< Informational frame:
< SAPI: 00 C/R: 1 EA: 0
< TEI: 115 EA: 1
< N(S): 011 0: 0
< N(R): 009 P: 0
< 4 bytes of data
-- ACKing all packets from 8 to (but not including) 9
-- Since there was nothing left, stopping T200 counter
-- Stopping T203 counter since we got an ACK
-- Nothing left, starting T203 counter
< Protocol Discriminator: Q.931 (8) len=4
< Call Ref: len= 1 (reference 132/0x84) (Terminator)
< Message type: RELEASE COMPLETE (90)
Sending Receiver Ready (12)
> [ 02 e7 01 18 ]
> Supervisory frame:
> SAPI: 00 C/R: 1 EA: 0
> TEI: 115 EA: 1
> Zero: 0 S: 0 01: 1 [ RR (receive ready) ]
> N(R): 012 P/F: 0
> 0 bytes of data
-- Restarting T203 counter
-- Restarting T203 counter
Then it says that Zap/1 is circuit-blocked. Where should I look for
solution?
-- Mike
More information about the asterisk-users
mailing list