[Asterisk-Users] TE11OP -> Mitel 200Sx??

Henry Devito hdevito at mchsi.com
Fri Apr 22 13:27:25 MST 2005


Don't you need one of these directives so the PRI knows which is master and which is slave?

a.. pri_cpe: PRI signaling, CPE side 
a.. pri_net: PRI signaling, Network side 

Henry
  ----- Original Message ----- 
  From: Scott Wolfe 
  To: Asterisk-Users at lists.digium.com 
  Sent: Friday, April 22, 2005 11:01 AM
  Subject: [Asterisk-Users] TE11OP -> Mitel 200Sx??


  Hello all. I just received a TE110P and am trying to hook it to my Mitel 200SX has anyone successfully done this? My configuration is as follows.

   

  Asterisk -> TE110P ->Kentrox (csu/dsu) -> Mitel T1 Card. 

   

  All I get is a blinking yellow on my TE110P card and an alarm on my Mitel. T1 card. 

   

  Any advice would be great. 

   

  Zaptel.conf

  span=1,0,1,d4,ami

  e&m=1-23 

  dchan=24 

   

  Zapata.conf 

  signalling=em_w

  switchtype=dms100

  echocancel=yes

  echocancelwhenbridged=yes

  echotraining=400 

  callerid=asreceived

  group=1

  context=default

  channel => 1-23 

   



------------------------------------------------------------------------------


  _______________________________________________
  Asterisk-Users mailing list
  Asterisk-Users at lists.digium.com
  http://lists.digium.com/mailman/listinfo/asterisk-users
  To UNSUBSCRIBE or update options visit:
     http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050422/efc0a0aa/attachment.htm


More information about the asterisk-users mailing list