[Asterisk-Users] can't make my PRI dial out

[Andrew Kohlsmith]

On April 22, 2005 10:41 am, Robert Webb wrote:
> Your zapata.conf should look like this:
>
> language=en
> context=default
> switchtype=4ess
> pridialplan=unknown
> signalling=pri_cpe
> echocancel=yes
> group=1
> channel=>1-23
>
> You need to move the echocancel and the group above the
> channel line. The channel line definitions must be above
> and not below.

You're right, but that's not his problem.  Cause code 0 is no cause code at 
all; I'd turn on "pri debug span 1" output and see what's coming up there.

-A.