[Asterisk-Users] Rhino Channel Bank

[BJ Weschke]

 I don't know about channel banks, but when you go T1 to T1 device
with a cable, you need the RX/TX pairs cross connected. Do you have a
T1 crossover cable in play or a straight through?

On 4/20/05, Dan Goscomb <dang at thebrokenkid.com> wrote:
> Hi
> 
> I have just purchased a Rhino Channel Bank and am using it connected to
> asterisk via a digium TE410P. I am having problems with connecting
> phones to the channel bank.
> 
> I have channel one connected to a patch panel, a line adaptor
> chonnecting the phone cord to the patch panel, and then the phone.
> 
> When i pick up the channel bank does not detect this. The phone does not
> ring when called.
> 
> Using a multimeter i checked voltage across the line and its 48V all the
> way up to the phone, so the wiring is fine...
> 
> Any ideas as to what could be wrong?
> 
> Regards
> 
> Dan Goscomb
> 
> _______________________________________________
> Asterisk-Users mailing list
> Asterisk-Users at lists.digium.com
> http://lists.digium.com/mailman/listinfo/asterisk-users
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>