[Asterisk-Users] BRI channels not answering

[Terry Wade]

Hi Guys 

 

I am trying to install a HFC-S isdn card into asterisk. Bri-stuff installs
fine and I have managed to get *-v-1.0.7 installed. All seems to run without
a problem, well except for the fact that the card does not answer any
incoming calls or make any outgoing calls. My zaptel.conf looks like this:

 

more /etc/zaptel.conf

# hfc-s pci a span definition

# most of the values should be bogus because we are not really zaptel

loadzone=us

defaultzone=us

 

span=1,1,3,ccs,ami

bchan=1-2

dchan=3

 

I have changed the default zones to a few different countries, nothing has
made any difference.

 

more /etc/asterisk/zapata.conf

;

; Zapata telephony interface

;

; Configuration file

 

[channels]

language=en

;switchtype = euroisdn

; p2mp TE mode

;signalling = bri_cpe_ptmp

; p2p TE mode

;signalling = bri_cpe

; p2mp NT mode

signalling = bri_net_ptmp

; p2p NT mode

;signalling = bri_net

 

pridialplan = dynamic

prilocaldialplan = local

nationalprefix = 0

internationalprefix = 09

echocancel=yes

echotraining = 100

echocancelwhenbridged=yes

 

immediate=yes

group = 1

context=demo

channel => 1-2

 

 

[dmesg]

zaphfc: CCD/Billion/Asuscom 2BD0 configured at mem 0xd89a1000 fifo
0xd1ed8000(0x11ed8000) IRQ 3 HZ 1000

zaphfc: Card 0 configured for TE mode

zaphfc: 1 hfc-pci card(s) in this box.

Registered tone zone 0 (United States / North America)

Registered tone zone 0 (United States / North America)

 

[root at carmen zaphfc]# ztcfg -vv

 

Zaptel Configuration

======================

 

SPAN 1: CCS/ AMI Build-out: 399-533 feet (DSX-1)

 

Channel map:

 

Channel 01: Individual Clear channel (Default) (Slaves: 01)

Channel 02: Individual Clear channel (Default) (Slaves: 02)

Channel 03: D-channel (Default) (Slaves: 03)

 

3 channels configured.

 

I have plugged the system into an ISDN NT1 box, and still cannot manage to
get something good. 

 

I have googled to my wits end and any help would be appreciated. If anyone
has some documentation on all the different options one has to ones
disposal, would also be appreciated. 

 

All my SIP phones work internally, I can send my extensions.conf as well as
sip.conf if needed.

 

TIA

 

Kind Regards 

 

Terry Wade

Mobile: +27 82 802-5750

Office: +27 11 784-7642

Fax: +27 11 388-0855

 

Linux is like a Wigwam - No gates, no windows, Apache inside

 

Disclaimer and Confidentiality Warning

 

This message is intended for the addressee only. If you are not the intended
recipient of this message, you are notified that any distribution, use of or
copying of this communication is strictly prohibited. If you have received
the communication in error, please notify the sender immediately. The views
and opinions expressed in this message are those of the individual sender of
this message and do not necessarily represent the views and opinions of
ActiCom. Consequently, ActiCom does not accept responsibility for such views
and opinions and this message should not be read as representing the views
and opinions of ActiCom without subsequent written confirmation. Each page
attached hereto must also be read in conjunction with this disclaimer.

 

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20050419/0fd5ba59/attachment.htm